Activity Stream

I suggest refraining from hitting the red stop button during bit changes. It's not only unnecessary, it also cuts power to the motors, rendering them...

I should mention I hit the red stop switch and the key is removed from the control box (which powers the VFD/spindle I believe) during a mid file bit...

Thanks for the tip! - can you point me to a pinion adjustment/check routine?

I have a 2013 PRS Alpha and when the system is powered up, the gantry is solid as a rock. No way to move it at all. I've changed bits hundreds of...

Here's a full video walk through of the machine: https://youtu.be/VaMBOqFreko Full specs, PRICING, pictures and video can be found here:...

If you don't call, you won't know. Besides, it would probably cost more to ship the darn thing than buy it regardless of where you sourced it (unless...

No, I assume it would be cheaper not going to shopbot.

Have you tried calling Shopbot?

https://store.designandmake.com/search/search/?q=open%2520book&types=Individual%2520Model Phil