Activity Stream

Well, considering the 7518 has vanished from the face of the internet... All I've found are 3 choices: Bora PM-P254 (available almost...

Good Evening Rob, Do you still have your PC7518? I live near Lawrence Michigan so not too far away.

That is what I saw also. Yes, it is a direct replacement for the PC 7518. It even fits the PC router base.

So far so good! Yes it is MDF and I do worry about it. The hold downs have to be angled a little which gives a small gap for the MatchFit to pull up...

It doesn't seem to have very good reviews on Amazon.

I am assuming that spoilboard is MDF, Wondering how the dovetail grooves are holding up? I mean, you get enough clamping force without damaging the...

Interesting, I guess it has the same diameter as the Porter Cable, I have a Porter Cable 7518 on my machine at the moment.

Your indexer still available?

Yes. I use mine all the time in my cabinet business.

Really beautiful Art Brian!! Jealous of your ability:) scott

My ShopBot Desktop has been sold. Thanks Gary

I've planed plenty of slabs on my SB and I've found that very little hold down support is required. As long as you don't try and take off 1/4" at a...

OP, I still like your table!!! Good job and thanks for pointing out the gadget. Gerg

I have used screws from the underside of the table, along with wedges strategically placed to keep the slabs as parallel as possible. Phil

Here's another video of doing something like this stackable crate: https://youtu.be/Ld7zXmhYoDM Here's the source model I used from SketchUp: ...

Why stop at the box gadget? What if you could make anything that you could design and turn it into ShopBot code in seconds: ...

Man the box gadget is pretty dang good. Hats off the the creator. I nailed it the first time (still can’t believe it). I just exported the file so I...

Monty… I was working on documenting my method of making boxes with box joints on all edges in case we ever had another “Camp ShopBopt” I was about...

Wait a cotton picking minute! There is a box gadget? I am using Aspire 9.5 and I don't have a box gadget! I painstakingly modded and modded and...

can someone tell me if this is still used with e-cabinets?

can someone tell me if this is still used with e-cabinets

OP, Nice Paulk table!!! Greg

It sure is! I've modified the hell out of it, totally new drive system, aftermarket control, custom designed 8 zone vac table, automatic tool...

Eric, is that the machine you bought from me??

Sorry for the late reply, just saw the thread. IDK if this will help you but Dan Swatski, a well respected sign artist (one of the few people in...