I always store my Z-Zero plate on my machine, touching metal. Today, my input #1 light is blinking. Seems to be a pattern of 3 blinks, then a pause,...
Removed from new-to-me PRSalpha 5x10 in the course of update to Acorn controller. I powered up tested all three axes prior to purchase, but couldn't...
Storing your z-zero plate touching metal doesn't sound right. Mine has always be isolated in a wood pocket. Touching (grounding) to metal is what the...
Just an FYI, but a 90 deg bit cutting full depth in one pass in 3/4" material is removing the same amount of material as a 3/4" endmill cutting full...
I think I figured it out. It appears that it's parsing the trailing "if" in your variable name as a second IF statement. Changing your variable name...
I haven't tested all the different possibilities, but if you want to have two tests I think your original tests work if you put the variable name in...
This doesn't answer your <> question...we'll look into that...but try replacing your 2 tests with the command below that uses the ABS command to get...