Activity Stream

Hey Jeff I have a 3D printer I can sell you Sorry to hijack your thread Scott

This is how I mounted my VFD when I did my machine

I remember that bra. i mean how could a person forget?

This your Desktop still available ?

Have you tried a Google Maps search for Makerspaces in New Hampshire? Not sure where you are but a quick search showed a handful of them. ...

So far no luck with fablabs or makerspaces. The one in NH is closed. MITs is not open to the public and haven't heard back from a few others in MA or...

I don't know.... PayPal donation of whatever you want for postage and plastic for 4 of them mailed from WI to US locations only. :confused: Colors...

And for those of us without 3D printers, they can be had for the incredibly low price of...?;) Jeff

Check out the thread below. It's cheap and may do what your wanting. I downloaded free version a few days ago and was able to make a small 8' wall of...

Can't seem to be able to edit orginal post. I am in Knoxville TN

Here ya go. I used a 0.16 layer height, 1.2 wall thickness with 3 top/bottom layers and 30% infill. Print them in pairs and have a spare for when...

yes, please post the STL file.

Looks to be Knoxville, TN

you need to put your location into your post.

I remember back then when ShopBot was looking for people to build these and help develop them. I thought "Wow! should would like to do that but...

I've been using e-Cabinets for like 6 years. While definitely not intuitive, once you get it figured out it works pretty well for cabinets,...

Looking to bend the ply? If that is your purpose you can make the bending kerfs a lot quicker with a saw.

I'm with Eric on this one. In fact, depending on the material and since the tip is 0.0625" diameter, I may be even a little more conservative.

I wouldn't go full depth with that bit. I'd do 1/8th passes, 2.5IPS to start at 12-14K RPM Just because it's got flutes all the way up doesn't...

I attached an image of the type of cuts I'm trying to make with this tapered bit. The overall slot depth is about 3/8". Is it recommended to make a...

According to the spec sheet: Cutting Length 1.25 inches

Hey Guys.....I’ve got Shopbot techs on the case now. It’s narrowing down to the USB control card .....it looks like it might have given up the...

I've removed all hubs from my setup. I use a USB extension cables from the VFD and controller directly to USB ports on my computer. I do have a...

I wouldn't use pink/blue insulation foam for that - You'll put a lot of labor and time into it and it will look like something the dog made. Just use...

At one time Shopbot was giving out little guys that look like the pix attached. What it was all about was that the USB 2.0 standard was what the...