PDA

View Full Version : Table



  1. Table Construction
  2. Table Squaring
  3. Gluing down 2nd sheet ?
  4. Table Surfacing
  5. 3" of MDF just for router to touch table top???
  6. Half table for 3 axis, half for 5 axis?
  7. Some Assembly Required
  8. Spoil board distance to floor?
  9. Location of Proximity Switch Targets
  10. Yellow Tubular Steel Parts
  11. The D@mn legs
  12. Assembly Help
  13. X-car, three wheels perfect, one outside by 1/32
  14. Offset Your Table
  15. Outside to outside rail 64.5"
  16. Top rail 64.375 not 64.5
  17. Tightening Rail Bolts and Torque
  18. Software appears buggy!!
  19. Glueing plenum down
  20. Is all uldf created equal
  21. Spoilboard problem this time
  22. Cable loop on way to control box
  23. Continuation of previous spoil board problem
  24. Splicing base layer
  25. How close is close enough
  26. Table position/size
  27. Table Thickness
  28. Installing plenum board