PDA

View Full Version : Archives - thru 2001



  1. X axis Quit
  2. Size problems
  3. Encoder Issues
  4. Z Axis Creep
  5. Feeds and speeds
  6. Patterns
  7. Cable from PC to shopbot
  8. Grounding tools
  9. Can’t connect PC to ShopBot
  10. Newbie problem
  11. Actual XYZ axis distance different than input
  12. Circle command
  13. Ovals - not circles
  14. How to repair damaged Driver Boards/Cards
  15. Continuous cut maximum commands
  16. Mirror image cutting
  17. Intermittent z axis problem
  18. Cutting Pockets
  19. Nothing will move! HELP!
  20. Centering drawing on preview scren
  21. New system variables????
  22. Shopbot software displaying incorrect depth
  23. Smoke and heat from shopbot control box + comm error
  24. Symmetrical file cuts asymmetrical wood
  25. Slipping or stalled is all I get with the new controller
  26. Big problem after installing 2. 28 and Load 22
  27. Problems loading sb229.exe
  28. Y axis occassional chatter and binding
  29. DOS memory problem on SB software.