PDA

View Full Version : Need ideas for sandblasting letters & graphics in granite.



graniteguy
11-07-2009, 02:41 AM
Brand new to ShopBot. I own a countertop shop and want to "set up shop" to sandblast my scrap pieces of granite with graphics, and/or letters. What equipment would be recommended for sandblast equipment, plotter/cutter, etc. Most pieces would be 2'x 2' or smaller. Thanks in advance for your help.

jerry_stanek
11-07-2009, 06:44 AM
Look into Widgetworks unlimited they have a nice vinyl cutter that should be able to cut your sand blast masks.

GlenP
11-07-2009, 10:47 AM
Frank, email me off the forum. Take a look at my website as well before you email. I do pet memorial, garden markers etc by sandblasting.
www.cutncarve.ca (http://www.cutncarve.ca)