PDA

View Full Version : antique kitchen



loriny
01-26-2011, 08:04 PM
Here are a couple shots of my first try at solid colors and glazing.
Lorin

gc3
01-26-2011, 08:31 PM
Nice job Lorin!

What glaze did you use?
I like the Mohawk heavy body as they tend to go off slower
Another idea is to wire brush by hand the panel so it can capture a very light coat of the glaze helps to blend it in.

Thanks for posting.

loriny
01-26-2011, 11:06 PM
The glaze was ML Campbell Amazing Glaze. It will hang up all over the panel no problem but this was just to be in the profiled areas. The rest of the panel was washed back with lacquer thinner. It works quite well. I normally use Target Coatings water based finishes but the glazes are quite tough so this job was done with solvent.
Lorin

kevin
01-27-2011, 06:28 AM
Lorin
Nice layout the cabinet next to the dishwasher looked like a headache

I,am not brave enough to advertise glazeing bold move Nice job
Thanks for posting I like seeing other work.You motivated me to post my new kitchen I did just before Christmass