PDA

View Full Version : Mother's Keepsake Box



mtylerfl
05-02-2011, 10:26 PM
Here's another free project I designed and is available for download from Vectric's website: http://www.vectric.com/WebSite/Vectric/projects/april-bonus-2011/mothers-day-keepsake.htm

This was a "last minute" bonus project, so I didn't make my usual PDF instruction file. However, you can view a few construction photos and read some more details about the project at the following link on Vectric's User Forum: http://www.vectric.com/forum/viewtopic.php?f=27&t=11147

I ran this project on a ShopBot Buddy PRSalpha BT48...a great machine, I might add! I used three bits on this project...1) CMT 60° "laser-point", 2) CMT 90°, and 3) a ¼" Down Cut for the profile cut outs.You can edit the tools and change the settings to your own preferences and requirements. The project is compatible with Vectric's VCarve Pro 6 and Aspire 3.

Here's what I used on my "Mother's Keepsakes Box":

- The wood is Maple
- Applied Minwax "Natural" stain #209
- Applied several spray coats of Krylon Acrylic Crystal Clear Gloss (sanded lightly with 800-grit sandpaper between every couple of coats)

Thanks again to Vectric and ShopBot!

dlcw
05-03-2011, 10:59 AM
Thank you again Michael.

You are so kind making these available to the masses. Mothers Day is a very special day and your wonderful design will make it even better for many mothers.

mtylerfl
05-03-2011, 03:47 PM
Thank you, Don! I appreciate the feedback.

dougo
05-03-2011, 07:10 PM
Thank you Michael. I am really enjoying your projects. Good way to learn to work with Shopbot plus very nice gifts.