PDA

View Full Version : stools made by Bill Young



upsman
02-16-2012, 09:37 AM
Hi i have been asked to make about 40 of Bill Young's stools for an upcoming benefit for a little girl with a broken back. For some reason i can not find the DFX file for the stool on my computer. I went to this page http://timkis.pbworks.com/w/page/22267169/Shopbot%20Stools But the link on this page for the file is no longer working. Does anyone have this DXF file they can post? or can email me. Thank you, Tim

steve_g
02-16-2012, 10:19 AM
I didn't find it either, seems to be some rearranging going on. However, this can't be very hard to collectively recreate or even make better for your particular use! tell me/us how the project will be used... will they be assembled by children, volunteers, or yourself? what tools will be available? hammers, nails, pneumatic staplers, screw guns etc. what are the preferred materials? thicknesses, blank sizes (full sheets or less) and any other important information.

I and some others I am aware of are "grounded" by medical issues and would enjoy a challenge!

Steve

found it http://www.shopbotblog.com/index.php/2008/09/something-simple/

bill.young
02-16-2012, 10:59 AM
It should be fixed now...thanks for pointing out the problem.

http://www.shopbotblog.com/index.php/2008/09/something-simple/

Bill

knight_toolworks
02-16-2012, 12:12 PM
i have a little nicer version if your interested.

pappybaynes
02-16-2012, 12:38 PM
Steve,
I would be interested in your version - email is rgbayneswoodworking at comcast dot net.
thank you!!!

upsman
02-16-2012, 02:37 PM
Thanks Bill

I am Interested
you can post or emai me at maroneys@gvtc.com

Thanks to all

Tim

adrianm
02-16-2012, 02:56 PM
There are a whole stack of stools and other things on the Shopbot project page.

http://www.shopbottools.com/mSupport/projects.htm

knight_toolworks
02-16-2012, 03:39 PM
There are a whole stack of stools and other things on the Shopbot project page.

http://www.shopbottools.com/mSupport/projects.htm
the one on the bottom of the page was the one I would have provided.