PDA

View Full Version : CNC Jamboree 2013



DigitalFabber
08-11-2013, 02:52 AM
We are Proud to Announce the 2nd Annual
Cnc Jamboree - Fall 2013 at Long Lake Park
Class Schedule (http://cncjamboree.com/Class_Schedule.html) - Presenters (http://cncjamboree.com/Presenters.html)
Last Years Event ... Articles/Pictures (http://cncjamboree.com/Last_Years_Event.php)

Is anyone interested in a whole lot of fun mixed with a little bit of training?
Well how about a lot of training?

September 20th, 21st and 22nd, 2013
Long Lake Park Campground, Lakeville, Ohio

The second annual CNC Jamboree will be held at Long Lake Park Campground the weekend of September 20th, 21st and 22nd. Classroom training all day Friday and Saturday with Sunday being open to the public - Show and Tell ... bring your work to show off, you never know who might be there that is looking for a piece just like that or who may find inspiration in your work.

The price of this event will be $225.00 per person (this includes FREE patterns, all the fun you can stand, give aways and more) registration at the door will be $275.00 per person and may be paid with cash or credit card only, NO CHECKS PLEASE - this does not include any accommodations or any items offered by our presenters of vendors.

We have added Sunday to the schedule for this event ... we are calling this "Shop Day" and anyone that attended our first event knows what this means. We will be making projects, sharing techniques, demoing machines and sharing all manner of closely guarded secrets.

Space is LIMITED so sign up early!
If you are staying at the park call and make your accommodations soon.

REGISTER NOW (https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=XZ9EJNYQXFQN4)

DigitalFabber
08-11-2013, 02:54 AM
http://cncjamboree.com/images/10cc9427db17b3377ad00ef46d485018_7m68.jpg

Please check out the official site for this event at www.CncJamboree.com (http://www.CncJamboree.com)

DigitalFabber
08-11-2013, 02:56 AM
Friday – Sept 20, 2013

10:30 -11:15
The essentials of gantry style CNC router setup and project cutting
Step-by-step introduction to setting up and cutting a project on gantry style CNC.
(Includes a machine demonstration)
Presented by TJ Christiansen, ShopBot Tools

11:30- 12:15
Inexpensive Vacuum hold-down techniques.
Ways to build your own low-cost vacuum hold-down system and other low-cost vacuum options.
(Includes a machine demonstration)
Presented by Randy Johnson, ShopBot Tools

Lunch - Provided

1:30 – 2:00
Best practices for cutting plastics
An overview of the types, their working characteristics, what bits to use and their recommended feed and speed rates.
(Includes a machine demonstration)
Presented by TJ Christiansen, ShopBot Tools

2:15 – 3:00
The magic of V-Carving
V-carving is a quick and easy way to turn 2D designs into decorative carvings. It’s not just for letters - if you can draw it, it will cut it.
(Includes a machine demonstration)
Presented by Randy Johnson, ShopBot Tools

3:15 – 4:00
The ShopBot Handibot - the SMART power tool.
It’s new, it’s portable, it’s open source and it’s app driven. See it in action.
(Includes a machine demonstration)
Presented by TJ Christiansen, ShopBot Tools

4:15 – 5:00
Screw free hold-down jig
Step-by-step direction for building Randy’s favorite quick release, no- screws, hold down jig.
(Includes a machine demonstration)
Presented by Randy Johnson, ShopBot Tools

5:15- 6:00
Q and A Time

Saturday – Sept. 21, 2013

9:30 – 10:15
Step-by-step guide to turning paper project plans into digital CNC cutting files.
Presented by TJ Christiansen, ShopBot Tools

10:30 -11:15
V-Carve Inlays
A technique that combines v-carving and the precision of CNC to create perfect fitting solid wood inlays. (Includes a machine demonstration)
Presented by Randy Johnson, ShopBot Tools

11:30- 12:15
Tips and Techniques for cutting plywood on a CNC
Choosing the right plywood and using the right bits, plus the best ways to hold it down for cutting.
Presented by TJ Christiansen, ShopBot Tools

Lunch - Provided

1:30 – 2:00
Tips for making fun and interesting novelty projects with your CNC
Free CNC project files.
Presented by TJ Christiansen, ShopBot Tools

2:15 – 3:00
Cutting projects longer than your machine.
Using a combination of easy software and machine set up techniques allows you to cut parts longer than the table limits of your machine.
(Includes a machine demonstration)
Presented by Randy Johnson, ShopBot Tools

3:15 – 4:00
Surprise ...

4:15 – 5:00
The ShopBot Handibot - New Tool New tricks
The Handibot uses the same control software as ShopBot’s full-size commercial machines. See what this smart little tool can do with all that brainpower.
(Includes a machine demonstration)
Presented by Randy Johnson, ShopBot Tools

5:15- 6:00
Q and A Time

DigitalFabber
08-11-2013, 03:05 AM
TJ Christiansen, ShopBot Tools

http://cncjamboree.com/images/7a737c50eea8d8cce3c5b2ff2cbb4e96_z6nc.png

TJ is an outdoorsman originally from northern Michigan. He spent his childhood in the woods gaining an interest in different species of trees and what they can be used for. Growing up in a family of carpenters he soon turned to learning the trade. After spending a few summers as a camp counselor TJ decided he enjoyed teaching as much as he enjoyed woodworking. He attended Western Michigan University and graduated as a vocational instructor for Industrial Technology. TJ spent five years teaching high school woodworking, carpentry, welding and alternative energies.

After his wife was accepted to Duke University TJ had to give up his teaching position and move to North Carolina. Luckily for him he came across ShopBot Tools where they were in need of a technician and instructor. Never having any CNC experience TJ was hesitant about this new adventure but TJ was soon bit by the CNC bug and knew he had to have a ShopBot of his own in his garage. For three years now TJ has been designing projects, assembling machines, teaching others how to use their ShopBot and spending any free time his wife will let him have out in the garage cutting out projects.

Randy Johnson, ShopBot Tools

http://cncjamboree.com/images/fa8723738b7ff67b02d4d9e96b570bbd_lvu4.png

Randy Johnson directs education outreach activities for ShopBot Tools, where he helps schools integrate CNC technology into their technology, engineering, woodworking, and art programs.

Randy also presents on a wide variety of CNC topics at ShopBot Camps (user group meetings) around the country. Prior to ShopBot, Randy served as Editor in Chief at American Woodworker magazine.

Randy lives in Minnesota, where he enjoys sailing in the summer, ice biking in the winter and woodworking all year around.

DigitalFabber
08-11-2013, 03:10 AM
Published on Thursday, 20 December 2012 23:58
Written by LindseyElza (Lindsey Elza)

A recap of the First Annual CNC Jamboree from a Digital Fabber Newbie.

As some of you may know, one of the initial pushing off points for Digital Fabber Magazine was the CNC Jamboree that happened the last weekend of this past September. The successful, two-day event held at Long Lake Park Campground, near Loudonville, Ohio, was the first of its kind; but, will hopefully be the grandfather for many more to come. During the event, we formed a valuable network of CNC users, exchanged new and challenging ideas on CNC technology, and for some of us, learned just what it was that we were getting into.

The limited knowledge I had of CNC machines prior to this weekend came primarily from school. In order to save time, professors encouraged us to use the laser cutter, plotter, and automated router. I tried to stay as far away from the shop as possible, preferring time in the computer lab where I assumed I couldn’t loose a finger or get a woodchip in my eye. Thus, when I was invited to the group, I was lured in with the promise of “steam punk” attire and graphics classes, not wood sculptures and 3D creation.

As the weekend drew near, I was able to convince my father to come with me. Using my meager database on CNC technology, I tried explaining it to him, “It’s a machine that you can carve pictures and signs and Christmas ornaments on.” Therefore, as the two of us set out on our eight hour drive, we were headed to event that neither of us understood the slightest about.

The nearer we got to the destination, the more phenomenal our drive became. The part of Ohio where the Jamboree was located is amazing. The campground is in the middle of gorgeous countryside with rolling green fields and some of the most beautiful architecture I have ever seen. Dad and I concluded that had the Jamboree been awful, the drive itself was completely worth it.

Pulling off the main road and onto a bumpy, little, county lane, we entered one of the largest campgrounds I have ever had the pleasure of visiting. I’m used to seeing the parks in the south that are inhabited for most of the year, where they have their cute gardens, outdoor kitchens, golf carts and pink flamingos. However, I never imagined that such places existed in Ohio, as well. Stunning, quiet, and calm, it surrounded a huge lake. The whole campground felt serine and peaceful; it was the perfect setting for creating.

Nestled on the lake shore, the clubhouse was where a majority of the weekend’s meetings would take place. When I entered the room, I gave my awkward hellos, knowing a total of three people in the room - one of which I had just spent eight hours with in a car. As introductions were made, it became apparent that people from all walks of life were in attendance. There were seasoned veterans touching up on their craft, high school boys interested in designing guitars, men and women, women who just came with their husbands and then those who, like my dad, just came with their daughters. Several lived in Ohio; however, there were others who had traveled from as a far away as Washington state. Most owned CNC machines - some of them had very expensive machines, some had very old machines, and some had built their machines from scratch. The diversity of the room was great and later it proved very interesting as ideas were exchanged and tales told.

None other than Wayne Sutter, president of Woodline.com, gave the hour and a half long introduction. Upon first glance, then second and probably third, he appears to be a bit of a CNC guru. He discussed stepper motors, software, CNC building, tearing the machines apart, and how to convince your Great Uncle Bruce that he needs one! His presentation proved to be a weekend overview and set the tone for what was in store. When Wayne finished, and we all had a brief break, I looked over at my father to ask if he was at all bored. However, the man sitting beside me did not have the face of one who was entering the first stages of catatonic boredom; rather, his eyes were glazed over and a small smile was twitching the corner of his lips. He quickly hushed my babble and told me to hurry or else we would miss Wayne’s lecture in the other building. He was hooked.

My father and I spent the rest of the day in the maintenance building. Do not be fooled by the term “maintenance building.” It is, in fact, a wood shop of the most magnificent scale, where Dough Hawkins - co-owner of the campground, happens to park his lawnmower. I thought my dad was going to cry. Actually, that was the response most people had when they entered this sanctuary of woodworking. Inside was showcased Jason’s work trailer, which is the rolling workshop for his business. Also on display, were several pieces that he had produced from working with his CarveWright, including some gorgeous Frank Lloyd Wright inspired cabinet doors that I’ve always considered stealing. The (home built cnc) machine that Michael had built was also there, along with several CNC machine variations that (were brought to share).

In the wood shop, Wayne led a discussion on how to build and program your own CNC machine; while, in the clubhouse, Michael conducted an actual build. Michael’s machine affectionately won the title of Garage Band CNC. If that’s the case, then Wayne’s could have been the Stark Enterprises machine. It wasn’t long before Wayne’s discussion of Mach 3 programming began to go way over my head. I think it was mainly due to my inability to understand and small attention span; looking around the others were latched onto every word he said and nodding vigorously. I probably should have returned to the clubhouse. There, Michael, before beginning his build, was demonstrating art creation software such as Illustrator, Photoshop, MOI, Blender, etc.

All in all, Friday wrapped up as an enormous success. Unfortunately, I made the mistake of not booking a cabin in the campground. So, my father and I headed back to our hotel in Wooster, OH. Those smart enough to stay onsite, partied the rest of the evening - eating delicious food, hanging out around the campfire, and telling their best stories. I don’t know what all went on that night, but I heard it was great fun.

Saturday was an excellent end to the Jamboree even though it left everyone wanting more. Michael and Wayne both continued their projects from the previous day, while several other speakers and demonstrators shared their knowledge base.

Joe Lovchick, marketing director for CarveWright, also took the stage several times during the weekend and walked those in attendance through CarveWright’s Designer software. He gave a fairly in-depth introduction to the program, and showed how to design a project from the beginning. Due to my graphics appreciation, this was one of my weekend highlights. I got in on the last part of his discussion during which he took an image of a fighter jet plane, imported it, and began creating a cutting template for his machine. It made me want to become a professional pattern designer.

For me, the icing on the weekend’s cake, was when Randy Johnson, editor of Woodworker Magazine took the stage. When he walked to the front of the room, a hushed silence of anticipation stole over the audience. He guided the audience through his experience with CNC machines and his enthusiasm for them was contagious. The projects he showed us opened up new possibilities in CNC use that many there had never thought possible. For the first time, I really began to see how phenomenal CNC machines are. I am sure that moment came sooner during the weekend for others. For my father, it was probably during Wayne’s introduction; but for me, this was the moment. He showed us bowls and boxes and ornaments and trinkets galore! He even gave us a sneak peak of his newest project that wouldn’t be available to the public till his next publication!

Once Randy left the audience in a speechless, CNC daze, the whole group headed back to the wood shop. We were able to ask any recap questions from the previous discussions and talk one-on-one with those who had given presentations. We had hands-on investigation of the machines and objects produced by them. Randy began working with a Shopbot, Michael woke up his machine and did demos on it, and Joe started two CarveWright projects. It was a great way to sum up the weekend and allowed those of us with a little less practice, to see the machines in action.

The CNC Jamboree was a fantastic experience, and well worth the long trip to Ohio. While I may not be an expert on CNC machines now, I feel savvy enough concerning them to strike up a good conversation. It helped connect a group of individuals from all walks of life and all corners of the continent with a common interest so that they could share ideas, issues, and work. It also gave a great insider’s look from pioneers in the field of CNC use. I am super excited about next year’s Jamboree, which I know will be bigger and better!

DigitalFabber
08-11-2013, 04:02 AM
Click Here (http://www.talkshopbot.com/forum/album.php?albumid=86)

http://www.talkshopbot.com/forum/picture.php?albumid=86&pictureid=565

DigitalFabber
08-14-2013, 01:05 PM
WE have added three classes that may interest you ...

Overview of V-Carve Pro and Aspire
The features of the Vectric software suite through the eyes of Michael Tyler.
Presented by: Michael Tyler, CarveBuddy

Fun & Fabulous Faux Finishing - Part 1
Glazing and Graining
Presented by: Michael Tyler, CarveBuddy

Fun & Fabulous Faux Finishing - Part 2
Metallics, Textures and Grunging
Presented by: Michael Tyler, CarveBuddy

Anyone that has seen Michael's work will know that these classes are going to be awesome.

TJ
08-19-2013, 12:06 PM
Really looking forward to this event! Going to be an action packed couple of days. Cannot wait.....

DigitalFabber
08-23-2013, 11:14 AM
Give Away at CNC Jamboree: Each CNC'ed USB Drive Box will contain a USB drive with a free mini-project pre-loaded. The mini Project will be the same project that was used to create the top of the box. On the drive that is in the box with the boot there will be the "Western Saloon" mini-project and on the box with the "Rose" will have the "Rose Tile" mini-project. Value $25.00 (unlimited possibilities) (this is 2 total drives to be given away)

http://cncminiprojects.com/

http://forum.carvewright.com/attachment.php?attachmentid=64248&d=1377270536 http://forum.carvewright.com/attachment.php?attachmentid=64247&d=1377270536

http://forum.carvewright.com/attachment.php?attachmentid=64246&d=1377270535

DigitalFabber
08-26-2013, 09:59 AM
If you are looking for accommodations for this event try this link http://www.hotelplanner.com/zip/Lakeville-OH-hotels-in-44638. I use Hotels.com often and I have had good luck with that.

DigitalFabber
08-31-2013, 01:02 AM
Everyone that attends the Cnc Jamboree will receive ...
A Box Project by www.CarveBuddy.com Value = $129.00

CarveBuddy is dedicated to providing fellow carvers using CNC woodcarving machines with helpful resources to make your experience with these machines more enjoyable and productive.

We utilize various techniques and technology to create a variety of unique 3-D patterns and projects for your enjoyment. We are continually working on bringing you new high-quality patterns and projects to choose from!

Feel free to browse through our selection of unique and useful patterns and be sure to check out our "FREE STUFF" section! All patterns on the CarveBuddy website are available as downloadable files, 24 hours a day, 7 days a week, for your convenience.

CarveBuddy is family owned and operated with a commitment to quality and integrity, striving to ensure that every visitor to our site feels they are well served!

http://www.cnczone.com/forums/attachments/trade_shows_events/198538d1377924845-2nd_annual_digital_fabber_computer-numeric-control_jamboree-fullscreen_capture_8312013_124359_.jpg

DigitalFabber
08-31-2013, 01:20 AM
EVERYONE WILL RECEIVE ...
All of the PowerPoint, Build Notes, and PDFs used in the Presentations. Value = PRICELESS

EVERYONE WILL RECEIVE ...
A $50 credit in the Pattern section of the Digital Fabber Store located at www.DigitalFabber.com

DigitalFabber
09-05-2013, 10:52 AM
The Presenters are telling us that they are bringing more samples/stuff then they want to carry home. Sounds like fun to us.

DigitalFabber
09-10-2013, 03:06 PM
We have had a great response to this years event. There are still seats available so sign up now.

Register Now! (https://www.paypal.com/us/cgi-bin/webscr?cmd=_flow&SESSION=FrFbUHLdMFcVlAnAeTjJzr-bZdWa-dWvzkKASyJH4TCOuYGaG8tUe-gc98W&dispatch=50a222a57771920b6a3d7b606239e4d529b525e0b 7e69bf0224adecfb0124e9b61f737ba21b08198dbcfd9e4393 51aac748846c5173df4f4)