Live Stream

[chadagmsign]

Just wondering if anyone has set up a live stream so our fellow shopbotters can see what others are cutting and setups

Thoughts? Ideas? Opinions?

If someone would like to check out feed please do and let me know it is working.

will not work in internet explorer use chrome or firefox
http://208.104.141.98:8080
user id:chadwick108
password:shopbot

[chadagmsign]

as is the easiest and there is no set up

[chadagmsign]

other camera is http://208.104.141.89:8081
user:chad
password:shopbot

I should have both bots running again within the hour...for now lunch time!!

[genek]

Just wondering if anyone has set up a live stream so our fellow shopbotters can see what others are cutting and setups

Thoughts? Ideas? Opinions?

If someone would like to check out feed please do and let me know it is working.

will not work in internet explorer use chrome or firefox
http://208.104.141.98:8080
user id:chadwick108
password:shopbot

I would love to be able to set up a live stream on making products, however I do not know how to do so, and I do not have a phone line in the cnc room. would need a remote camera that could send image to my computer that I do have internet on.
I could teach a very good class on production runs.

[chadagmsign]

i could probably help with set up if you have some older android phones they are great for ip cameras.

PM me if you would like some other input or what you might be able to make work.

thanks for the input!!

[genek]

Would love to don't have any old cell phones. I am about as dumb as you cam get with computers if it is not plug and play I have to get a computer guy in.

[genek]

I did not grow up with a computer, I have seen the computer go from taking up a whole room to what I use today. I got my first pc when I bought my laser, I had to be taught how to save a file \. I am 60 years old and too old to learn to many more things. I grew up drawing, and have learned how to draw on the computer, but even hooking up what most call simple things is a task for me.

[Kyle Stapleton]

Link is not working

[chadagmsign]

will try and get back up again today and get some more feedback links may change so be looking for new links

thanks!

[chadagmsign]

http://208.104.141.89:8080/browser.html

Please let me know if it is working today.

thanks again!!

p.s. keep in mind you must use firefox or chrome internet explorer will not work...sometimes if does not load page right away you may need to refresh it.

[Kyle Stapleton]

This is what I get on my ipad

[chadagmsign]

other feed can be found at
http://208.104.141.89:8081/browser.html

firefox or chrome then click on use built browser viewer then refresh the page

[chadagmsign]

This is what I get on my ipad

from apple store download chrome or firefox and then open with either browser on ipad and it should show video

[Kyle Stapleton]

What was from Crome.

[chadagmsign]

http://208.104.141.89:8080/

then click the 5th link down

Use browser built-in viewer (not supported by some browsers)

[chadagmsign]

I checked externally to make sure it worked today.

:)


goo.gl/e32weI (http://goo.gl/e32weI)

[chiloquinruss]

It's no fair running the vacuum for cleanup before turning on the cameras! :D Nice looking sign on da' bot. How is it held down? Russ

[donclifton]

A dropcam is the easiest to use. You just need a wireless connection, no even a computer.
Don

[chadagmsign]

It's no fair running the vacuum for cleanup before turning on the cameras! :D Nice looking sign on da' bot. How is it held down? Russ

Thanks russ

most everything we use is held down with screws not the best method but it works and is easy

[chadagmsign]

A dropcam is the easiest to use. You just need a wireless connection, no even a computer.
Don

have not heard of drop cam will do some research on it thanks for the tip!!

[chadagmsign]

having some trouble with our Main machine (alpha) the past week having to run the other one for a few days.

livestream @
http://goo.gl/q745oL

Happy Tuesday!!

[gene]

Jim McGrew has what they call a Dropcam that you can look at in real time . Maybe he can tell us more or go to dropcam and see how to do that

[chadagmsign]

Cutting out mickey mouse and troubleshooting
http://shopbot.moneydontgrowontrees.com

[donclifton]

Here is a link to my Dropcam. https://www.dropcam.com/p/j53qDU
I don't do a lot of cutting, I mostly make CNC type stuff. Both routers are built like a shopbot and the one on the left started out as a Shopbot but I did a lot of mod's to it.
Donald Clifton

[chadagmsign]

Here is a link to my Dropcam. https://www.dropcam.com/p/j53qDU
I don't do a lot of cutting, I mostly make CNC type stuff. Both routers are built like a shopbot and the one on the left started out as a Shopbot but I did a lot of mod's to it.
Donald Clifton

This is exactly some of the feedback I was looking for as now i am curious about the dropcam idea. If you would please shoot me a email at Chadagmsigncompany@gmail.com next time the cam is live.

thanks so much!!

[chadagmsign]

link is available here today!! (http://208.104.141.89:8081/browser.html)

[chadagmsign]

Livestream feed (http://goo.gl/q745oL)

[chadagmsign]

click here for today's live feed! (http://goo.gl/fhyvIo)

Use browser built-in viewer (not supported by some browsers)
you must be using chrome or firefox.

happy viewing!

[Mayo]

The live feed worked for me - using Firefox and the browser built in viewer.

Man that looks like one tall Z clearance, unless it's just the camera angle.

Was that PVC you were cutting? Do you find that it stinks when you cut it? No matter how I change my cutting strategy or bits, the PVC I get all has a foul odor when cut.

Curious why you have the grooves in the spoilboard - is it to line up jigs or something else?

[gene]

Jim McGrew in columbia SC uses them in his shop . It recorded a trash can ignite hours after cleaning up a spill of lindseed oil soaked saw dust . He posted the video on you tube and Thank the Lord his whole shop did not go up in smoke , A very important lesson about safety and dropcams.

[jerry_stanek]

The live feed worked for me - using Firefox and the browser built in viewer.

Man that looks like one tall Z clearance, unless it's just the camera angle.

Was that PVC you were cutting? Do you find that it stinks when you cut it? No matter how I change my cutting strategy or bits, the PVC I get all has a foul odor when cut.

Curious why you have the grooves in the spoilboard - is it to line up jigs or something else?


Try komatex or celtex they each have a different smell to them Sintra smells the worst

[cabnet636]

Thanks Gene I am feeling Blessed I did not lose it all !

[mick_martin]

Buy a Dropcam easy to setup

[chadagmsign]

click here for today's live feed! (http://goo.gl/fhyvIo)

Use browser built-in viewer (not supported by some browsers)
you must be using chrome or firefox.

happy viewing!

same link new feed live now!

[chadagmsign]

http://goo.gl/peF69W

use chrome or firefox then click
Use browser built-in viewer (not supported by some browsers)

[chadagmsign]

http://goo.gl/khyz6m

use chrome or firefox as browser for best results!
livestream should be up till at least 4:30 pm today 3/19

HAPPY VIEWING!
www.moneydontgrowontrees.com

[Carlson]

Dropcam is the way to go, we have one for security and general peeping :D my business partner and I can also easily communicate because they utilize a 2 way mic system so he doesn't miss out on any crucial decisions or just cool cut files. The delay is only 1-2 seconds and has a crazy sensitive microphone. We have the Dropcam Pro and it is true 1080, 130degree lens, 30 frames per second (fps) and 8x digital zoom. Uses infrared for night vision which works really great. Once we get more work started we'll be making ours Public. Can pop it up remotely on my smartphone at anytime to make sure my baby is sleeping well :) Check them out Botters...

[chadagmsign]

Dropcam is the way to go, we have one for security and general peeping :D my business partner and I can also easily communicate because they utilize a 2 way mic system so he doesn't miss out on any crucial decisions or just cool cut files. The delay is only 1-2 seconds and has a crazy sensitive microphone. We have the Dropcam Pro and it is true 1080, 130degree lens, 30 frames per second (fps) and 8x digital zoom. Uses infrared for night vision which works really great. Once we get more work started we'll be making ours Public. Can pop it up remotely on my smartphone at anytime to make sure my baby is sleeping well :) Check them out Botters...

Hi adam I want to look into dropcam a little more as I am getting a lot of positive feedback on them and quality on the pro is excellent. Do you recall where it was that you purchased yours from?

Thanks for the feedback!!

[chadagmsign]

Click here for Today's feed! (http://goo.gl/GlsZWg)

:) Happy Thursday!

[chadagmsign]

Shopbot #1 Feed (http://goo.gl/GlsZWg)

ShopBot #2 Feed (http://goo.gl/U1ooS9)

[chadagmsign]

My Xoom is plugged up and charging if anyone is wondering should have second cam back up shortly.

[Carlson]

Sorry for the delayed response. We purchased it off of their website, www.dropcam.com (http://www.dropcam.com) . It was either $149.95 or $199.95, we went with the $199.95 because we were already investing and decided it was worth $50 for higher resolution. Once we get going we are going to make ours "Public" it's awesome and they have a huge growing community and you can watch cameras at gas stations, pet daycare, gyms, karate studios, college 3D printer labs and many more. Real cool, you should look into it, that is also a one-time investment, you only pay $10 per month if you want to record and save your footage (DVR). Do it ;)

[myxpykalix]

Yes but you must remember you have someone watching you, so you can't pick your nose or scratch yourself!:eek:
I have a camera setup to watch while i'm doing a 3d toolpath that may take hours and i go inside and watch football.

[Carlson]

Yes but you must remember you have someone watching you, so you can't pick your nose or scratch yourself!:eek:
I have a camera setup to watch while i'm doing a 3d toolpath that may take hours and i go inside and watch football.

HAHA I completely agree Jack, always need to be camera ready! I have been using mine for the same though, if a long job is going I can keep an eye on it from inside where my Lay-z-Boy is :D

[chadagmsign]

cutting some woodgrain on Bot #2
using new IP cam app


Click Me for livestream! (http://www.moneydontgrowontrees.com)

Here is a photo taken with droid razr maxx which is streaming live

http://i57.tinypic.com/30u3d6r.jpg

[chadagmsign]

Let's try again!
sorry other link was to my blog.

this one is correct!! (http://http://208.104.149.21:8080/)

[chadagmsign]

http://goo.gl/pN8vpM

[chadagmsign]

http://goo.gl/pN8vpM

Looking to get some input as comments and questions and or suggestions from others.

If you viewed the live stream feel free to drop me a email and let me know what you think!

[chadagmsign]

click HERE for today's livestream!! (http://goo.gl/OI33g5)

http://i61.tinypic.com/bx6dj.jpg

[chadagmsign]

goo.gl/OI33g5
click on browser using firefox or chrome for best results then audio if you prefer
thanks for looking!!

http://i58.tinypic.com/6410m8.jpg

[chadagmsign]

link for today! (goo.gl/PkP3WZ)

goo.gl/PkP3WZ

[chadagmsign]

http://goo.gl/uH8fUm

cutting some Disc Golf Signs Out of King Color Core

[chadagmsign]

link for today! (http://goo.gl/ClpOj4)

http://goo.gl/ClpOj4 (goo.gl/ClpOj4)

[chadagmsign]

lets see how this works out!

[chadagmsign]

todays livestream can be found here! (http://goo.gl/tkTu1C)

Click on browser then audio opus works the best for me. Please DO NOT turn on LED.

[chadagmsign]

Livestream can be found here today! (http://goo.gl/V8MN3r)

[URL="http://goo.gl/V8MN3r"][URL]

[chadagmsign]

Going to try to set up a couple different angles today

Here is one link for now! (http://goo.gl/3v97VN)
http://goo.gl/3v97VN

[chadagmsign]

still troubleshooting Alpha hopefully figuring it out!! (http://goo.gl/nhbC8s)

http://goo.gl/nhbC8s

[chadagmsign]

new link for today can be found here (http://goo.gl/2EjxBn)

http://goo.gl/2EjxBn

[chadagmsign]

http://goo.gl/YprK3j

click here for livestream!! (http://goo.gl/YprK3j)

[chadagmsign]

http://goo.gl/YprK3j

click here for livestream!! (http://goo.gl/YprK3j)

Camera will be on and off today. Having to charge them.

[chadagmsign]

Have some previews to do. May take a break and surface the table today. although I have not decided yet lol. ;)

Link can be found here!
(http://goo.gl/2Nu7sU)

[chadagmsign]

Bot back up and running?

found a filter have a sign running. fingers crossed!!

http://goo.gl/KQHRFV

[chadagmsign]

New link for livesteam can be found here! (http://goo.gl/XL8Qxd)

[chadagmsign]

http://goo.gl/hV4nUv

[chadagmsign]

http://goo.gl/kgEY5a

[chadagmsign]

Thought I would stream for a little bit while the shopbot tech was here and helping me troubleshoot problems today.

check it out here!! (http://goo.gl/vJsE7Q)

[chadagmsign]

running some double sided 911 signs today and single sided nameplate on other machine.

check it out here!! (http://goo.gl/YHm5cJ)

[chadagmsign]

Cllick here for today's stream (goo.gl/YoTZ0B)

[chadagmsign]

click here for today's livestream! (goo.gl/YoTZ0B)

[chadagmsign]

click here for today's livestream (goo.gl/0utH1U)

then use firefox or chrome for best results and choose use browser built in viewer

[chadagmsign]

cutting 12" textured stop signs today....need 47 of them!

check it out here! (goo.gl/YoTZ0B)

[chadagmsign]

Last Batch for now!

check it out here!! (http://goo.gl/kLVWJT)

[chadagmsign]

Music on the Mountain Standard Texture for Lake Toxaway Country Club (http://goo.gl/Wr5Hw0)
Check it out here! (http://goo.gl/Wr5Hw0)

[chadagmsign]

Took the live stream back down for today. Still having problems with ShopBot control software foreclosing having to contact ShopBot again!?

[chadagmsign]

please use the link above from earlier today!

[chadagmsign]

sorry for the late link have not had the bot running all day today.

click HERE for the link! (goo.gl/Wr5Hw0)

[chadagmsign]

click here for today's livestream!! (http://goo.gl/2J5G2j)

[chadagmsign]

Please use link in yesterday's post.

[chadagmsign]

click here for today's livestream (http://goo.gl/B9HsPw)

click on browser at the top then html 5 opus for sound if wanted

please do not change any other settings.

enjoy!!

[chadagmsign]

running another sign like yesterday 10" x 84" woodgrain texture

if do not know how to navigate the page refer to yesterday's post.

Click here for stream!! (http://goo.gl/WS7JyZ)

[chadagmsign]

Please use this one!

click here! (http://goo.gl/aKPQs5)

[chadagmsign]

should have it up for a couple of hrs until phone dies.

click here for today's livestream! (goo.gl/7p67ez)

click on browser and html 5 opus if you prefer sound.

Please do not mess with anything else.

thanks!!

[chadagmsign]

doing some standard texture double sided today. Click here to check it out! (goo.gl/oeeVPF)

click on browser and html 5 opus if you prefer sound
please leave others alone.

thanks and enjoy!!

[chadagmsign]

CLICK HERE FOR LIVESTREAM!! (http://goo.gl/VNVktd)

click on browser, then click on opus for audio if wanted.

please do not change any other settings.

thanks for watching!

[chadagmsign]

Click for livestream!! (http://goo.gl/5dkN12)

[chadagmsign]

after link loads click on browser then html5 opus if you want sound.

please do not change any other setting.

thanks for watching!!

[chadagmsign]

trying another method today

http://www.ivideon.com/tv/camera/200-fed30eea3d8ee69c631e3dbec74bbf8e/0/?lang=en

[genek]

for some reason my malware comes up and stops your feeds. Says your system is trying to change my settings. You may want to check your system for virus etc.

[genek]

This is what my malwrebytes anti-malware says. Malicious website blocked.msk05.ivideon.com ip 85.192.44.129 port 58010 type outbound program files(x86) mozilla firefox udated/firefox.exe.