PDA

View Full Version : Clamp options (Lee Valley)



fredtoo
01-19-2010, 10:46 AM
I have no first hand knowledge of the clamps but I do endorse Lee Valley. They have no store fronts in the US, just Canada, but their catalogs and mail order (typically shipped from Ogdensburg, NY) are excellent.

http://www.leevalley.com/wood/page.aspx?c=2&p=64685&cat=51&ap=1

myxpykalix
01-19-2010, 02:10 PM
Upon first look, i like the low profile aspect but to me the killer is the almost 2" post height to sink it to table surface meaning you would have a second substrate to have to sink this into thereby losing 2" depth under the router. Not sure how this would work for our needs on a bot.
But i am in agreement about Lee Valley, i do like their products and service.

billp
01-19-2010, 02:30 PM
Are we reading the same ad? I thought it said a 3/4" through hole is enough to hold it in place. If so most Shopbot tables are fine.....

frank134
01-19-2010, 02:54 PM
Look and read the picture. for clamp a you need 1-7/8" through hole and for b you need 1-3/8"

myxpykalix
01-19-2010, 06:02 PM
the way i read it you need a depth of 1 7/8"

3393

frank134
01-19-2010, 06:10 PM
That for the a unit. The b unit picture say 1-3/8"