PDA

View Full Version : limit switches, fan, and Zplate wires into control box



Randy Bogardus
02-09-2014, 11:44 PM
I have almost all of the wires organized and am ready to hook these fine gauge wires into the control box terminal blocks. The wires are very tiny and I'm having difficulty stripping the insulation from the wire ends. So, the first question is how do you strip such tiny wires? I've looked for strippers and can only find them for 22ga and no smaller. Also, I'm wondering if there is some sort of crimped on end that should be used on the wire ends for securing them in the terminal blocks. I did test fit some bare wires into the terminals and it seemed like a rather flimsy connection. Thanks for any input, all!

Randy