Wrong sizes

[dan_nelson]

When I enter wall cabinet depth at 11.25 and than nest it the part says it's 10.5 when you hover over it on the nesting sheet I'm I missing something?

[mark_stief]

Does he finally have a setting for face frame cabinets that's what it sounds like it's trying to do for you Enter a 12" cabinet and see what you get

[dan_nelson]

Thats what it is. I dont know how that happened I havn't upgraded or changed settings and how do I get changed back to frameless cabinets? something tells me ill mess up a sheet if i forget to do the math

[mark_stief]

Dan Not sure I just guessed at it mines an old version and it only does frameless I'm used to doing the math for face frames Hell if he has that option now it might be time to upgrade mine

[Ryan Patterson]

Dan,
What size and thickness is the back? Could it be that you have the construction option set to have the back overlay the sides top and bottom? With this option and you have back material set to .75" this would make the sides 10.5" and the back would measure the same size as the entered cabinet.

[dan_nelson]

I might of just had a aha ,moment!!!