PDA

View Full Version : Denim Pine carving



danhamm
06-09-2015, 09:42 PM
Denim Pine test run.

Brian Harnett
06-09-2015, 10:03 PM
I like it but I would like it more without the frame detail, it takes away from the subject. just my opinion

Chuck Keysor
06-09-2015, 10:59 PM
Dan, I am assuming you call this denim pine because of the bits of blue coloring in the wood. If you like that, you should have seen the wood from a white oak tree I had sawn into planks, 15 years ago.

Embedded within this huge old oak, were LOTS of pieces of iron. Things like nails, spikes, barbed wire, and even a 3/4" dia. threaded rod, that was over a foot long........ Each bit of iron reacted with the acid in the oak, to create large, DARK blue stains. As I sorted through all the wood after it came from the lumber mill, I cut out all the big blue volumes of oak, and burned them! As I wanted clean, quarter sawn oak, I never imagined anyone would want such discolored wood.

Oh well, live and learn. Chuck

danhamm
06-09-2015, 11:49 PM
Yes, I use the timber from the property, we have a variety of discolored wood from barbed wire tree to tree fencing.
Like this one.