PDA

View Full Version : Looking for SE Atlanta Bot Owner to Cut Molds



mclimie
03-23-2016, 12:33 AM
Hi all,

If there are any ShopBot owners in SE Atlanta (Stockbridge, McDonough, Griffin, etc) or reasonably close that do contract work, I'd like to connect.

Essentially we have a need to cut HDU (31# Ren initially) contra molds, 11-24" diameter, no more than 1" cut depth. HDU, bits and tool paths would be provided. I attended an intermediate training at SB HQ where we cut some molds, so we have all the workflow kinks worked out of that process.

There would be 3 bit changes per job; rough, finish and pencil cleanup.

If anyone is interested, please let me know so we can start a dialog and see if it's workable. I know this stuff is time intensive, so hopefully it's do-able. Thanks for reading!

Marc

ByronConnDesign
04-02-2016, 12:20 PM
Hi Marc,
I am not near Atlanta - in Rochester, NY but if shipping is not a problem I'd be happy to have a conversation with you.
www.byronconndesign.com
Best,
Byron

bleeth
04-02-2016, 04:56 PM
If you look up David Buchsbaum on the forum and contact him he may be able to help you.
He is just Northeast of midtown.
Hasn't been active on the forum lately so he may not have seen your post.

mclimie
04-02-2016, 09:31 PM
Thanks everybody here (and those who PMed). I really appreciate it. I'll be in contact.