push stick file - anyone want it just ask

[Ajcoholic]

Hi,
Just a simple project but I use these all the time in the shop and thought I'd share. Its my version of a table saw push stick, based on the plastic one I got with my Sawstop saw in 2010, but a little longer handle. I find the angles and so forth just right.

I cut these on my Shopbot with the vacuum hold down, and no tabs. But, would be easy to tab and/or hold down with clamps or screws.

Here is the file in a .DXF file so I can attach it. I use 12mm Baltic Birch.

Andrew

http://i83.photobucket.com/albums/j307/ajcoholic/ajcoholic022/IMG_1386_zpsqlnep7uv.jpg (http://s83.photobucket.com/user/ajcoholic/media/ajcoholic022/IMG_1386_zpsqlnep7uv.jpg.html)

[genek]

Thanks nice push stick.

[knight_toolworks]

here is mine using a handsaw handle https://dl.dropboxusercontent.com/u/1939753/push%20stick%20handle.crv3d

[elcar903]

figures that someone would post it after I already drew it up and made a few lol

thanks for the share

[willmorgan]

Very nice, thanks for sharing both of you!

[dmidkiff]

Thanks for sharing.

[chiloquinruss]

This is a much better thread than that of 'how many stitches I just got'! :D Thanks for thinking of the rest of us and posting a 'safety' item. Russ

[Ajcoholic]

This is a much better thread than that of 'how many stitches I just got'! :D Thanks for thinking of the rest of us and posting a 'safety' item. Russ

No prob. I hope others like it too. Ive cut a lot of different styles over the years. This one is a nice shape, size and seems to work well for me.

[knight_toolworks]

here is a pic of mine http://www.talkshopbot.com/forum/attachment.php?attachmentid=27895&stc=1

[dmidkiff]

Thanks Steve. I will nest some of each next time I have a scrap of 1/2" baltic birch.

[knight_toolworks]

I may had a bit more forward tilt and a non slip strip on the bottom would make it really good. I don't use my saw a lot so I have been lazy.