CNC Seminar - River Falls, WI Aug, 2016

[Gary Campbell]

The School District of River City Falls (WI) and Kyle Stapleton are proud to announce that we will be hosting a 3 day CNC Training Seminar, August 11, 12 & 13, 2016 at the Renaissance Academy in the Workshop and Technology Lab.

Our school address is:
River Falls Renaissance Academy
1107 South Wasson Lane
River Falls, WI 54022

The Seminar will provide training on Vectric software titles Cut 2D, VCarve Pro and Aspire combined with instruction on machine operation, material hold down and placement. It is modeled after the very successful Aspire Camps presented by Jim McGrew in recent years, combined with OEM software training plus the added benefit of a full day of user selected software training with "at the machine" demos.
We have 2 CNC machines; a ShopBot 5 by 8 and Desktop that will both be used in the Workshop portion. There will be information that benefits users of machines, both large and small, of any brand. Please download the Class Agenda PDF for a full description.

The Seminar will be presented by instructors Michael Mezalick and Gary Campbell. Both have a wealth of knowledge and a decade of experience with Vectric Products and various brands of CNC machines. This training seminar is designed to both bring new users an increased knowledge and confidence for their CNC journey and provide techniques and methodology that will offer seasoned veterans new tools to increase their success.

The cost for the 3 day seminar is $300. This covers tuition, various handouts, water, soft drinks, coffee, donuts and light snacks. There will be a 1 hour lunch break which should allow you to enjoy one of our fine local restaurants. There are a limited number of seats available that will be assigned on a first come, first served basis. Confirmation will be based on date of actual payment, not register date. Once registered, you will be sent an email with payment options.


To Register click here: http://cncseminars.com/registration-page/ (http://cncseminars.com/registration-page/)


Daily Schedule:
8:00 AM Doors open, coffee and donuts
8:30 AM to 12:00 PM Morning Session
12:00 PM - 1:00 PM Lunch (on your own)
1:00 PM to 4:30 PM Afternoon Session
5:00 PM Doors Close

There will be breaks near the midpoint of morning and afternoon sessions.
Water, soft drinks, coffee and light snacks will be provided

Hotel / Motel info here: https://www.google.com/maps/search/river+falls+wi+hotels+motels/@44.8988423,-92.7778814,11.06z?hl=en

There is a group rate at the Best Western Plus Campus Inn.
You must call (715) 425-1045 and mention "CNC Seminar"

For more information either post here or email: registration@cncseminars.com

Stay Tuned for More Dates in More States!

[Kyle Stapleton]

We have a newly reno'd school and shop all with AC so summer is not a problem.
Here are some shop pictures (classrooms are being used will add some at a later date)
28455284562845728459

[Kyle Stapleton]

More pictures.284602846128462

[dmidkiff]

Very nice looking shop. How many sq.ft. and how many air cleaners? Would you mind posting a closer pic of the yellow dust hose arm?

[Kyle Stapleton]

It's about 1,500 sqft with a 2-300 sqft finishing/storage room next to the cnc.
We have one air clear (working on getting two)2846328464

[mezalick]

Just a note for anyone planning on attending the River Falls CNC Seminar in August.

There is a group rate at the Best Western Plus Campus Inn.
You must call (715) 425-1045 and mention "CNC Seminar".
.
Hope to see you there..
Michael

www.cncseminars.com (http://www.cncseminars.com/)

[Kyle Stapleton]

Here are some classroom photos.
There will be two projector showing the same information (one front and one rear) so viewing will not be a problem.28467284682846928470

[dmidkiff]

Thanks Kyle, looks like a first rate facility. Wish I could attend the seminar but it is just too far. Will keep my eyes open for a closer one.

[Gary Campbell]

The list of attendees is starting to build for this Training Seminar.
Attendees are reminded to bring a problematic design file. These can be files
that are generated by Cut 2D, VCarve Pro or Aspire. (including Desktop versions)

If time allows, solutions for Photo VCarve and Cut 3D problems will be
discussed also.

[Kyle Stapleton]

Will be adding thing to do in and around town.
Rush River Brewery http://rushriverbeer.com/
Fishing on the Kinni http://www.twincities.com/2014/07/24/why-wisconsins-kinnickinnic-river-is-a-fly-fishing-paradise/

[mezalick]

Greetings Folks,
We’ve received several emails about what type of machine we will be focusing on for our seminar..
Our focus is to show how to use the Vectric programs and how to apply them to any machine.
So it doesn’t really matter what colour your machine is...it’s all about getting the item you want to cut to come out correct.

See you there.
August 11 – 14
River Falls, WI
www.cncseminars.com (http://www.cncseminars.com/)


Michael

[mezalick]

Incorrect dates..
It should have read
August 11 - 13




Sorry about that
Michael

[Gary Campbell]

The actual design doesn't normally change between machine brands, but toolpath parameters need to be appropriate for material, machine and bit. These items and post processor selection, along with file saving and transfer are covered. There are close to a dozen different brands of machine owners registered, which should allow for some great discussion.

There are 5 things that all CNC operators must know to be successful no matter what emblem is on their machine. The actual command or mfgr given name will vary with the control software, but the machine actions and how they affect the operator are the same. They are: (in generic terms)

Set Machine Coordinates (home, set machine or table coordinates, set to limits)
Place and hold material
Set the X & Y datum (zero) to corner or center of material
Set the Z zero to the top or bottom of material
Load and run the cutting file

These items are covered in depth, along with reasons you may want to choose one option over another. Knowing why and how to accomplish these 5 steps, selecting the best option for the project, and how to match the design criteria are the are the basis for the CNC portions of the classes.

[mezalick]

CNC Seminars is please to announce that Burton Gavin will be our guest presenter at the upcoming River Falls WI seminar.
August 11-13
Burt is a retired Tool & Die maker, who now makes wooden toys.
The toys are mostly his designs and are usually patterned after real vehicles.
Once a toy is complete he will donate the toys to Toys For Tot`s and the local women's shelter.


We think everyone will enjoy seeing and learning what and how this miniature marvels come to be.


Seat still available..
http://cncseminars.com/registration-page/




Michaelhttp://www.talkshopbot.com/forum/attachment.php?attachmentid=28553&stc=1

[mezalick]

Greetings all,
Just a note to let you know that there are 5 seat remaining for the River Falls WI Seminar..
Once these seat are filled we will start a waiting list for those wanting to attend.
Registration alone will not guarantee a seat.
We feel the fairest way to ensure a seat is the date of payment received.




https://squareup.com/store/gcnc



We want to purposely keep this event as small as possible so you can get the personal attention you need.
Gary and I will be personally available to help with your questions or problems.


It’s getting close so make your plans now.
Signup Today.


Thanks,
Gary & Michael
www.cncseminars.comhttp://www.talkshopbot.com/forum/attachment.php?attachmentid=28596&stc=1

[Kyle Stapleton]

The last day to get the group discount on a hotel room is the 17th

[Kyle Stapleton]

School is ready to go.
Also if anyone coming up has a router lift they would like to sell please send me a pm.28688

[Gary Campbell]

Kyle...
I am looking forward to this seminar. We have a good mix of both
experience and machine brands. For the experienced it will be a time to show
their skills and possibly mentor a newfound friend. For those with less CNC time,
the networking will be an invaluable chance to add to their skillset.

I am looking forward to the user driven portion of the seminar. I am sure it
will be an interesting lesson on one hand and on the other a welcome change of
pace.

[Kyle Stapleton]

Please bring safety glasses, to be in the shop with tools running you must have safety glasses on.
We will have some (10-15 pairs) for sale for 5.00, but will not be handing any out as previous guests to the shop have walked off with them.:mad:

Thanks,

[Gary Campbell]

Doors will open Between 8:00 and 8:30 AM

[mezalick]

Day one of the River Falls , WI Seminar is in the record books...


Full house, lots of information...Gary Campbell did an outstanding job.


Now, it's my turn.....


Ready for Day 2


Our thanks to all that attended..


Michaelhttp://www.talkshopbot.com/forum/attachment.php?attachmentid=28706&stc=1

[mezalick]

Gary and I would like to take this moment to thank all who attended the River Falls CNC Seminar.
A special thanks to Kyle Stapleton and the School District of River City Falls (WI) for allowing us to use his space.
Important information was shared and new friends were made.


We look forward to more events such as this in the near future..


Again, our thanks and we hope it will be helpful as you more forward in the CNC world.
Best regards,
Michael
www.cncseminars.com (http://www.cncseminars.com/)

[srwtlc]

A big THANK YOU to Gary and Michael for putting on a top notch seminar! I would highly recommend if they come to a location near you and you can attend, take advantage of it! There's a lot good information for the beginner to the advanced user, covering all aspects from A-Z-3D. Keep in mind that if you're an advanced user and Gary knows it, pay attention all the way through, because he'll try to catch ya when it looks like you're not (like when trying to fix your laptops WiFi connection)! ;-)

Also, another big THANK YOU to Kyle and the River Falls School District for the excellent venue!

Good job everyone, keep it up!