PDA

View Full Version : Quickie for our reunion



danhamm
07-05-2016, 01:07 AM
Made this for our reunion, it was a hit.

garyr6
07-05-2016, 09:25 AM
Nice work , They are right, you are a hero!

cowboy1296
07-05-2016, 10:16 AM
I do 3-d, that was no quickie. What kind of wood and what kind of finish? Nice work.

chiloquinruss
07-05-2016, 02:50 PM
"that was no quickie" I totally agree! ;) Russ

danhamm
07-05-2016, 04:23 PM
It was a quickie for me as I have run stuff in the 109 hour range, this was only with rough cut and fini only 27 hours, the Wood is 3 inch clear cedar and min wax oil then Sikkens clear cote.

James M
07-05-2016, 10:05 PM
That is a beautiful sign. Well done! Did you have to cut it twice being that it was softwood?

Again very nice.

danhamm
07-06-2016, 05:31 PM
The rough cut was done with a 3/4 bit and the fini with a 1/4 rt. only one pass cross grain, very seldom get fuzz on dry cedar.

elcar903
07-08-2016, 01:31 AM
Amazing job

bobmoore
07-12-2016, 07:17 PM
That is some fine cedar. Great job Dan. How did you fasten to the posts?

danhamm
07-13-2016, 01:55 PM
http://www.talkshopbot.com/forum/attachment.php?attachmentid=28598&stc=1Was bolted through the 2 stringers, easy to assemble or take apart.