5' x 10' PRT ShopBot Forsale

[Sonrise Poly Rockers]

2004 PRT 60 x 120 ShopBot
This machine was used to cut parts from HDPE for outdoor furniture.
3 HP. Colombo spindle that is still in great condition.
Has ¼ hp. auxiliary floating head drop-down router for engraving.
Higher Resolution belt drive upgrades to the X and Y axis.
Z axis has a lot of wear.
Machine is being sold as is, Machine is still connected and in working order. We upgraded to a newer machine and we need the shop space cleared out where this machine is.
We are including 5 of the LH6765-13 heavy duty vacuum blowers that are mounted directly underneath the table, wired with switches for each zone. http://www.centralvacuummotor.com/lighthouse.htm

Located in Denver PA

We are motivated to move this Machine asking $ 8,000

[Phil C]

Is it still available

[Sonrise Poly Rockers]

Yes at this point it is still available.

[Sonrise Poly Rockers]

5 x 10 Machine has been sold!

However I do still have a PRT 5 x 5 machine very similar to the above post that is for sale. Contact me for details if interested!

[Wyatt]

How much for the 5 X 5? Can you post some pics and some info about it?

[Sonrise Poly Rockers]

I am sorry I must have had a brain freeze. The machine I still have for sale is ONLY a 4 x 4. Not a 5 x 5 as I had stated.
It is a 2004 4 x 4 PRT with the original stepper motors. This machine was in working order about 6 years ago when it was taken out of service and has been stored since then.
I will add the pics soon.

[Sonrise Poly Rockers]

How much for the 5 X 5? Can you post some pics and some info about it?

Here is the link to the post with all the info for the 4 x4.

http://www.talkshopbot.com/forum/showthread.php?23153-4-x-4-PRT-for-sale-in-PA&referrerid=7199

[Jimlawhon]

do you still have the 4x4 machine if so call me at 361-463-0700