DJGreene30
09-06-2016, 01:01 PM
I have a 2014 model Shopbot Buddy BT48 (PRS standard) with a 6 ft powerstick (48x48 xy cutting area) for sale. Single phase 220V. 2.2 hp HSD spindle with VFD. Has less than 20 hours of operation. I am the original owner, purchased new and have been traveling for work with no time to play with it.
Accessories:
Z-zero plate
3 axis zero plate
3D immaging probe
Starter bit set
Various additional bits
Software:
Rhino 5
Aspire 4.5
V Carve Pro shopbot edition 8.0
PartWorks 3D
Machine was about 13K
Software was about 1.2k
Accessories/bits about .8k
Total invested = 15k
Will entertain reasonable offers.
Machine is located in Raleigh, NC.
Contact me at DJGreene30@live.com
Regards,
DJ Greene
Accessories:
Z-zero plate
3 axis zero plate
3D immaging probe
Starter bit set
Various additional bits
Software:
Rhino 5
Aspire 4.5
V Carve Pro shopbot edition 8.0
PartWorks 3D
Machine was about 13K
Software was about 1.2k
Accessories/bits about .8k
Total invested = 15k
Will entertain reasonable offers.
Machine is located in Raleigh, NC.
Contact me at DJGreene30@live.com
Regards,
DJ Greene