PDA

View Full Version : Kids Picnic Bench



ADAPT_Shop-Brady
06-26-2018, 04:38 PM
We needed a quick table and seats for ~4 kids for a feeding group at our clinic. The shopbot turned a sheet of 1/2" baltic birch plywood into a quick solution. Design and toolpathing done in Fusion 360.
31738
Video of the build:

https://www.youtube.com/watch?v=7VJAnX6D9as

Fusion design video is still on the cutting room floor. Will post it here when it's done.

guitarwes
06-29-2018, 09:15 AM
Cool table. Pretty strong also. Thanks for posting and taking the time to setup all the camera angles and editing.
I build one of the kid tables that Vectric posted on their free projects page. It's takes a whole sheet of 3/4' Birch and has to be glued. It's solid as solid can be. My whole family stood on top of it at the same time and it didn't even grunt.