Need help with settings

[pro70z28]

I have a problem. An electrical storm took out the mother board on my computer. We fixed that, reloaded the shop bot & part Wizzard software. I sent a job to the shopbot and got a message saying I'm in plazma cutting mode. I'm hoping someone can tell me where I go to switch it to router mode. If I remember right this happened once long ago, but I can't for the life of me find where to switch it back to router. Thanks for any help you can provide.
gary

[frank]

Hi Gary,

It sound like you selected the wrong post processor in Part Wizard. Make sure that you select the ShopBot inch arc or mm arc post processor.

[Towersonline]

Gary, I looked thru my version of the ShopBot software 3.19 and found no reference to the Plasma cutter. I’m guessing you are using an older version of the software, perhaps DOS. If your running the windows version you might try downloading the latest version. A call to ShopBot may be in order if that does not work.

[pro70z28]

I have a dell XP with part wizard v1.02. Where do I go to find the post processor? Thanks again.

[pro70z28]

Thanks Frank. It's up and running as I type this. The setting defaulted to Plazma as you thought. I have some trim boards to put flutes in for a cabinet maker. This makes us both happy.
Thanks again
Gary