PDA

View Full Version : Part works file from Only saved tool paths


hunterland
03-28-2009, 12:14 AM
Is it possible to recreate the part works file if I only have the tool path files left? THANKS IN ADVANCE Don
Gary Campbell
03-28-2009, 09:24 AM
Don there is a converter that will take a .sbp file and convert it to a dxf. That dxf can be brought into PWKs for redesign and/or toolpathing.
Gary
hunterland
03-28-2009, 11:22 PM
Where do I find the converter? One of these days I'll learn to save and save again .Don
Gary Campbell
03-28-2009, 11:26 PM
Don...
Sorry... On the SB3 File Menu [F]ile [C]onversions
Gary
hunterland
03-31-2009, 05:12 PM
Gary when I tried to convert the tool paths to dxf the file comes out as corupt or incomplete! I figure it is because it is only part of the tool paths as the others have other cutters,and other tool paths Thanks Don
Gary Campbell
03-31-2009, 05:19 PM
Don...
We save the .crv files and can the .sbp files... much easier to retoolpath.

Gary