95 degree edge

[chuckster]

I have a customer that needs 10 of these with a 95 degree edge. Any ideas on how to accomplish this? I don't think anyone makes a 95 degree chamfer bit!
95 degree angle

4653 (49.7 k)

[harold_weber]

You just need to look at this another way. Simply buy a conical bit with a 5 degree per side taper. Two sources are conicalendmills-dot-com and Onsrud (their 77 series)

[chuckster]

This is what happens when one does not pay attention in math class! Thanks, Harold, I never even thought of that!

[knight_toolworks]

msc will have an endmill at 5 degrees.