dave_k
04-15-2008, 07:36 PM
I'm trying to wire my PC router to my PRS alpha buddy. Can't find this in the manual (maybe I missed it?) other than it refers to the wiring diags that were in the control box. I've poured over those diags and my question is where is the best place in that control box to wire power to my router. Should I take it from contactor 1 (the one farthest from the line filter), the blue K1- and K1+ wires coming from pole A1 and A2 on the contactor? Those two blue wires (K1- and K1+) run to [router K1A] connection on the control board.
I would cut the plug off the end of the router supply cord, and wire the black to the K1+ and the white to the K1- at the contactor, and the green to the chassis ground strip. Am I way off base here?
I would cut the plug off the end of the router supply cord, and wire the black to the K1+ and the white to the K1- at the contactor, and the green to the chassis ground strip. Am I way off base here?