View Full Version : X-car, three wheels perfect, one outside by 1/32
03-23-2008, 09:57 PM
Rolling the x-car by hand, three wheels are in the rails perfectly, and one of them is off by about the same amount (1/32) for the length of the machine (10ft). Rails are level, straight, table is square.
I'm about to decide that it's that wheel and not the rails.
Am I missing something?
03-23-2008, 11:10 PM
Call ShopBot. They will tell you the procedure for fixing it.
03-25-2008, 12:13 AM
Are your wheels the newer ones with a concentric center? (a cam) you should be able to turn it to adjust the height. But if brady says call I would call.
03-26-2008, 12:59 AM
Shopbot said shim that wheel. Luckily it was outside the rail not inside. They said there were spacers included. Not sure if I used the right ones (didn't see anything that looked like a washer), but 2 .0075 spacers got it in line.
vBulletin® v3.8.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.