PDA

View Full Version : Cutting acrylic



randall_e
03-18-2008, 08:15 AM
Newbe here. What is the best feed rate, spindle speed and bit to use when cutting 3/16" acrylite SG. The letters are 12" - 15" tall.
Thanks, Randy

djmcnutt
03-19-2008, 02:59 PM
I would suggest going to https://www.onsrud.com/ and check with them. They helped me with the same problem. It all depends on the type of acrylic.

aaasigncom
03-20-2008, 12:20 AM
RANDALL, USE THE SEARCH FEATURE. THERE IS A TON OF INFO ON ACRYLIC CUTTING. USE 1/4" SINGLE FLUTE - CUTS LIKE BUTTER. GO FOT IT!