Some recent carving work for Mirror Frames...

[khalid]

Here are some more work i did yesterday...


1743


1744


1745

[jon]

Khalid, did you build your own machine chassis? Please contact me at jonerikjohansen@yahoo.ca (mailto:jonerikjohansen@yahoo.ca) if you did. I am currently redesigning and modifying my PRT Alpha 96, and would love to share ideas with you.

[khalid]

I build the complete machine out of MDF ;) The above carving and all of my recent work is carried out with the same MDF machine...
I am just outside my CITY, i will return back on comming Thursday, i will contact you then... my email address is
engr_khalid_khattak (at the rate of ).yahoo.com

[carlosgmarroquin]

I admire your resourcefulness.

[khalid]

Thanks Carlos
...
JON, Following is my MDF Machine CAD drawings pictures... This machine has bigger working area and some unique built-in features for stability, rigidity and anti-racking... long axis is driven by Single Lead screw at the center with only 200 Oz-in motors...

1- The size of my table is 60" x 44"
2- The working area is 48" x 34"
3- The travel of Z-axis is 7"
4- i am using ACME screw (5/8"-5 TPI)... The length of long axis(Y-axis)is 62" and the small axis(X-axis) is 46"... the length of the z-axis ACME screw is 17"...


1746


1747

[khalid]

The details of the X-axis... These were some rough drawings i created as wel as machined on my Steel CNC Router...


1748

[carlosgmarroquin]

very nice

[khalid]

Thanks Carlos