CAMP VCARVE PRO -- MAY 16-17 2009 INDIANA

[don]

REJ (Robert) from Bridgeton Indiana has decided to host a gathering for users of Vcarve Pro \ PartWorks.
He'd like to make this an annual event.
If anyone is interested, feel free to can contact either me (mailto:donald9@gmail.com) or REJ (Robert)at this thread he started CAMP VCARVE PRO (http://www.vectric.com/forum/viewtopic.php?f=2&t=5114) thread

[don]

Hey Guys....

REJ (Robert) Has asked me to bump this thread as a reminder in case some have forgotten or missed this thread.
Here is his post:

Hello guys.
I am ready now for a count on who is coming for sure so i can get you confirmed sleeping quarters. Free.
I have limited SLEEPING space for about 8 to 10 here so let me know asap.
First come first serve so give me a call at ------------ or an email at -------.

We will begin at 8:30 am, SATURDAY, 5/16/09 for breakfast.
Then break at noon for lunch, begin again at 1:00 and go till the last man drops.
Dinner will be at 5:00.
SUNDAY Wil begin at 8;30am for breakfast and go till 12:00 for lunch and then go untill the last man drops.

You are welcome to come on Friday.
Food for Friday is on you at the local resturants.
All other meals for Saturday and Sunday are provided by us.

Cost for Camp is FREE
Cost for meeting new friends - Pricelss.

THANKS
REJ
His contact information is on the original post on Vectric's Site (http://www.vectric.com/forum/viewtopic.php?f=2&t=5114&start=60)

[angus_hines]

Don this would be considered a "User Group". It might do better if you post it over in the Camp/User Group /Jamboree section of the forum.

And didn't you have a TV show back in the day?

[don]

Hey there Angus,
I wish I was that guy, I'd have a gaggle of Bot's..
Yes your right, it is probably considered a users group. I just didn't want to confuse anyone that its a shopbot camp.

We have about 13-14 people going to be there.
It's basically helping those new to cnc and vectrics software to help and get them up to speed. And if anyone else is interested, there is no limit to how many can come.

[don]

The Vcarve Camp (http://www.vectric.com/forum/viewtopic.php?f=2&t=5114&start=75) was a Big Hit.
Everyone had a Great time.
Robert and his wife were a great host and provided meals for everyone.
There will be another Camp next year.
Check out the Vcarve thread, in the next few days.
We'll post some photos.
Thanks to shopbot for allowing me to post this info and to Vectric for their great software.

[john_hartman]

I'll second that! I wish I could have stayed both days. It was great meeting some like minded people and look forward to another gathering. Big thanks to Roger and his wife for hosting.