Only a little over 4 hours because it was smaller.
Printable View
Only a little over 4 hours because it was smaller.
Of course the Moose WILL be a button soon.....just like the Loon scene:)
Same exact bit and strategy....only the feeds were changed to protect the innocent.
scott
Apprentice liked "Lady" so much I made her one for Christmas.
Used Drillman1's $4 Kyocera.125" 45 degree this time instead of the 30 degree used on mine on the right.
Cut an hour off the cut time to an even 4 hours:)
Had family over day after Christmas. 4 adults and niece and nephew(12 and 8) and they wanted a start to finish new project to watch so each person could see what they were interested in.
Kids got a kick out of choosing their shape and both wanted Freestyle Script as their font.
Entire pocket was done with a MillMonster .125" 3F countersink bit with about a .03"flat at 10% stepover.
Cutout with a Whiteside Pointcutting Round Over .5"D .25R.
Everybody got a kick out of how fast VCP8 was to mod, and then watching the Desktop cut:)
Good time was had by all for almost an hour.
Oh, Kids decided to make them keyrings--so 5 minutes with drill press made it so.
scott
Those are pretty slick Scott! ;) Padauk?
Thanks Scott.
Nope, Just Black Walnut.
I can see why you thinks so from the flash pic on right though:)
A Lady wants some keyrings made for $6-8 wholesale, so that was in the back of my mind when I made these.
She wants silver dollar/half Business card size though.
Putzing with original Triskellions:)
scott