Has anyone figured out how to make a 3 axis Z zero plate? (I would love a pre-made one but at $250 USD it would cost me about $430 Canadian with exchange, fees, taxes.)
Thanks
Printable View
Has anyone figured out how to make a 3 axis Z zero plate? (I would love a pre-made one but at $250 USD it would cost me about $430 Canadian with exchange, fees, taxes.)
Thanks
Many of us have done this using a copper pipe cap imbedded in a jig… should be many posts and sample code here on the forum…
SG
I searched, looked through 4 pages, not much there.
See if this search has what you are looking for…
http://www.talkshopbot.com/forum/sea...earchid=237745
SG
Here's one that I found along with a rountine
Attachment 25872
Attachment 25873
can't find the original post on SB forum for this one:
https://www.etsy.com/transaction/1013709486?
It was only $30 + shipping, you might try contacting him thru Etsy and see if he still sells them.
Here is a dxf of the one I did. it is .75 thick clear acrylic and has a pocket for a .75 copper pipe cap
RB…
Sorry about the bad link… apparently I’m having issues cutting and pasting with windows 10… The search was for "super z" Leave the quotes!
SG
My version is in this thread - http://www.talkshopbot.com/forum/sho...-Zero-able-Jig!