Online Training - Wednesday July 19th, 2017 - Tabbing Parts
Hello everyone,
Please join ShopBot Tools this Wednesday July 19th, 2017 for a free online training. The topic this week is “Tabbing Parts.” The training begins at 1:00pm eastern time and runs approximately 45 minutes. It is then followed up by a 45 minute Q & A for participates to ask questions and work with each other.
Using a ShopBot and the Vectric software this training will help users with tabbing parts. Tabs are also known as bridges and they are used to hold a part to the scrap piece when other methods of hold down are not available. We will look at how to add tabs to your parts, amounts, locations, tab sizes for different types of materials and cleaning up a tab after the cut is complete.
There is no need to sign up, just show up a few minutes early on Wednesday and click on the link below. You will log into GoToMeetings and wait for the training to get started. Make sure your computer volume is turned on.
If you have any other questions please feel free to shoot me an Email. This training will be recorded and posted for future viewings. Those recordings can be found on our ShopBot Tools Training Page.
Thanks and hope to see you there. Thanks, TJ
Tabbing Parts
Wed, Jul 19, 2017 1:00 PM - 3:00 PM EDT
Please join my meeting from your computer, tablet or smartphone.
https://global.gotomeeting.com/join/203565069
You can also dial in using your phone.
United States: +1 (646) 749-3122
Access Code: 203-565-069
Joining from a video-conferencing room or system?
Dial: 67.217.95.2##203565069
Cisco devices: 203565069@67.217.95.2
First GoToMeeting? Try a test session: https://care.citrixonline.com/g2m/getready
