2 Attachment(s)
Not cutting smooth Looking for insight
I recently upgraded from an old PRT (serial port old) to the new RBK control system. I have noticed that machine does not cut as smoothly as it use to cut.
I had to adjust the drivers for the motors and set them according to per the recommendations from the Tech Team at ShopBot.
I am noticing what I am calling a "Chatter" for lack of a better word. Also the machine will move slow the quickly then slowly again.
Here is a link to a video (youtube) of how the machine is moving. Also attached are some pictures of the "chatter".
https://youtu.be/_0btY9-8ySY