-
5 Attachment(s)
Thanks Bobtail. I took advantage of the long weekend and got a little more done on the vac system. I just couldn't bring myself to go to the hardware store & buy off the shelf brackets. I've still got a punch list of things to do, but getting close. The ceiling fans and light switches are behind the rack. I can still reach them but I can see myself fumble around in the dark trying to locate them, so I'm moving them up on the panel above the hoses.
-
Look very handy. You've given me lots of great ideas as I essentially have a blank slate that I'm building from right now. Thanks for taking the time to share.
-
Thanks guitarwes. My next project is another JET Vac, this time for the ShopBot. I've had the one on the ShopBot for a number of years, but not with a dust separator. And for while now I haven't been using it at all, because the dust boot on the ShopBot wasn't doing the job. It's a project I've been procrastinating about for too long.
I'll be building a new dust boot for the Perske Spindle, the Wire harness bow that came with the CNC broke so the wires are a mess. I'll be replacing that with a drag chain. I plan to update to the latest version of Aspire, add a 4th axis, and give the CNC room a clean & reorganize, as it's looking pretty neglected these days.
-
4 Attachment(s)
Finished up the Table Saw/Miter Saw dust collector today. Now it's time to start the ShopBot upgrades.