All,
If anyone needs them I have several Dell GX270 XP machines that I have gone through and reimaged with the original factory image. Will sell them for $30 plus ship. I work in the IT industry and these are left over from a corp refresh...
Joe
Printable View
All,
If anyone needs them I have several Dell GX270 XP machines that I have gone through and reimaged with the original factory image. Will sell them for $30 plus ship. I work in the IT industry and these are left over from a corp refresh...
Joe
This is the one that I bought.
http://www.microcenter.com/single_pr...spx?sku=459065
Finally!
My shopbot seems to be back in business. 3 days cutting without problems.
I did a lot to insure the electrical supply was clean and without interference from other equipment, grounding, etc.
However, the solution came by replacing the USB card and with it the firmware on the control box and laptop.
Thanks to everyone for their input.
One year later... SAME PROBLEM!!!!
Quickly went through the whole check up scenario, could be static, could be noise, etc but everything was working and was the same (laptop, cable, etc) as a year ago.
So I just requested a new control card (hurry up Fedex !!) and waiting for it to arrive and swap them.
Hopefully another year of work after that.