It sounds like you need to cut a lot of theses sheets. In that case you should make a dedicated vacuum jig with a cover gasket. that way you will not need tabs. By using the cover gasket you will not...
Type: Posts; User: oddcoach
It sounds like you need to cut a lot of theses sheets. In that case you should make a dedicated vacuum jig with a cover gasket. that way you will not need tabs. By using the cover gasket you will not...
Have you checked that the set screws are tight on the drive gears? Also how old are the gears if they are worn you will get sloppy results.
I gave up on the springy arch about 8 years ago. I just have 2 wood uprights and let the cables droop between them. I have not had any problems since I made the change
It looks like you problem is caused by the tool rastering and not following the shape you want. from the pictures it looks like the problem only exists on the first cove. you need to add 2 profile...
you can also make precise adjustments to the pocket by adding a profile path to the same vector then you have the offset function. To upgrade call Shopbot and talk to Diane. you will not be...
Thanks to Bill Angus Jacqui and Shopbot. as usual it was a great day and well worth the ride. lots of cool stuff and cool people
Thanks for the input I do say what the money is for in the video. I want to make some dedicated vacuum jigs out of aluminum I also need to do some more work on the ecommerce website but Kickstarter...
Thanks Guys
Jack the case splits in 2 you can see the seam on the back of the one in the picture. I think the wood ones look better than the metal ones too :)
Steve I chose Kickstarter as more of...
ok here we go
having trouble with the picture
Hi all I have a Shopbot project up on Kickstarter wooden iPhone cases and docking cradle
\image{iPhone}
i would appreciate some input from the group...
http://http://s3.amazonaws.com/ksr/projects/92562/photo-full.jpg?1344388956
I am planning to go and bring some friends with me
I just put some clear packaging tape over the magnet
Just a minute or 2
Hi I cut ome of the same shell for a local guitar guy. i just crazy glued the whole shell to a piece of wood. I used the thicker stuff to fill any gaps. I cut all the way through the shell. when i...
Thanks Dick
I'll check out Universal
Very nice Brady
Thanks guys
I know what the lasers an do and i have no problem designing for them.
i was hoping for some input on manufacturers. I have been looking at epilog.
I have used A Trotec and the...
Hi Guys i am thinking of adding a laser engraver to the shop and was looking for input from the gurus
thanks
John
There are some companies that make fiberglass that looks like carbon fiber. it is much cheaper and easier to cut than the real thing. carbon fiber is murder on tools.
pink or blue styrofoam building insulation. all the lumberyards lowes and home depot have it
it comes in 2' x 8' panels 1" and 2" thicknesses
last time i looked it was about $12 for the 2"
http://www.razorsharpgrinding.com/
they manufacture the tools in PA and usually have everything in stock
i also use the mitee bite clamps. I make a pocket for the part to sit in. this works well if you have multiple parts to do. I have been using rubbing alcohol as a cutting fluid. It keeps the bit very...
Hi guys I exchanged emails with Jens and he has added a button to the app that reloads the last file cut (control+r)