The gear or “pinion” on the motor shaft should be absolutely tight! The set or “grub” screws were often installed two deep with the top one locking the bottom one. If you only re tighten the top one,...
Type: Posts; User: steve_g
The gear or “pinion” on the motor shaft should be...
The gear or “pinion” on the motor shaft should be absolutely tight! The set or “grub” screws were often installed two deep with the top one locking the bottom one. If you only re tighten the top one,...
Sure sounds like the pinion is loose on the motor...
Sure sounds like the pinion is loose on the motor shaft!
When checking the “grub” or set screws, remove it completely first to see if there’s another onr below it…
SG
