UPDATE: So I moved the z-zero wire to pin 3 which had 5 volts. I changed the settings in my variables file to look for input 3 instead of input 1, and now it is working fine. However, I am still...
Type: Posts; User: TNWALKINGHORSE
UPDATE: So I moved the z-zero wire to pin 3...
UPDATE: So I moved the z-zero wire to pin 3 which had 5 volts. I changed the settings in my variables file to look for input 3 instead of input 1, and now it is working fine. However, I am still...
Old PRT 32 x 24 Shopbot from the 90's
Hello, recently my z-zero plate stopped working. When I measured the voltage at the PC power supply connector to the PRT board, it is showing 5v on 1st pin, then 2 grounds and 12v on forth pin. ...
