Ok! Great! Thanks guys, this helps alot!
I have a dust collector on the machine but I think I will need to figure something out to get in while making deep 3d cuts.
Type: Posts; User: ase3558
Ok! Great! Thanks guys, this helps alot!
I have a dust collector on the machine but I think I will need to figure something out to get in while making deep 3d cuts.
So I was just wanting to get some feedback. A student came in today wanting to mill a plaster block to pour glass into, essentially milling a glass mold. Has any one had any experience with milling...
Its a PRS 48x96. Have a four motor set up for the vac box but some of the motors blew out so they need replacing. Should I wait to install the new board till I have to motors running for the vacuum...
Hey guys,
This is my first time messing with our vacuum table that the old shop manager put in. The top MDF board is done and need to replace it with a new one. Could someone kinda go through the...
Scott,
I was looking at the other day! I think your right, I think that might be cleaner.
Joe,
Yeah this is what excites me also. Just want to put bowtie joints on everything now! lol
Yes it is purple heart. For the bigger gap I was going to try closing it in on the end with a temporary piece and pouring clear epoxy to fill in that gap. Seen some interesting things done like that...
Just standard inlay. The crack was pretty big so I wanted to get deep enough to hold it together. The inlay is about 0.5". Those v inlays look great! really want to give it a try.
This was my first time trying a Bow tie/butterfly joint on a scrap piece of walnut . Think it came out pretty good. Cant wait to try it with some different designs.
22511
So I have a Shopbot PRS and we have had it for 4 years and have been having so many weird problems with it. It will randomly lose its Z position, slow down, the spindle shorts out. I have tried...
So I went through all the post and tried everything. Went faster and deeper and it lost its x y zero position. I saw the whole gantry jolt. Like the rotor was getting stuck and the gantry kept...
yeah the rockler bits are hss. how would i check if the router is going in the wrong direction?
I got a Freud bit at first and it broke almost immediately. I looked at the bit and it doesnt look like there are any chips and it feels sharp. Im really at a lose. I thought it might be the...
It was a brand new bit when I started the cut. Unless that one sheet dulled it half way through.
PRS 96x48 with a router attached. Would making shallow cuts be buidling up heat because only 1/8 of the bit is being used?
going 0.5 depth of cut wont put too much strain on the 1/4" bit?
Ok thanks. Ill try that
I am doing a project for a client and have been cutting a bunch of 3/4" Baltic Birch ply. Got half way through the first sheet and noticed the edges were starting to burn. I stepped away for a bit...
Ok! Ill try that! Thanks for all the help Steve! It was driving me crazy!
Ok! So you mean when I drop the motors I need someone to lift it up when I am tightening to make sure its fully engaged?
I dropped all the motors and on the last one the grub screw was so loose it was almost falling out. I tightened it down and just did a test using a Vbit. Think its as good as its gonna get. What do...
The gantry has alittle play to it, but just alittle. I cant really feel that much on the y car. Ill try dropping all the motors and tightening the screws.
Hey guys, got a shopbot PRS 96x48 and Ive been having a bunch of problems with it. Whenever I try and cut circles or a diagonal cut the circle is not circular and the line will be wavy. Also, I tried...