on a prs standard we are trying to change the 1 inch safe z so that we just clear so that we can still cut 3.5 deep with the cutter that we have. thanks Don Hunter
Type: Posts; User: hunterland
on a prs standard we are trying to change the 1 inch safe z so that we just clear so that we can still cut 3.5 deep with the cutter that we have. thanks Don Hunter
Hello Don what model Rikon lathe did you use for your setup. I know this is an old thread thanks Don
Has anyone tried to use one of these for a vacuum table? with all of the farmers going out of milking there a few around in my neighbor hood.
Also can I start with my existing table and convert it...
Has any one tried using this kind of rotary pump on a vacuum table . I have a 48x96 PRS standard . it was set up with a conventional spoil board. Do I need to remove that table to create a vacuum ...
Hi Joe are the board samples 3d carved or v carved, Thanks Don
Thanks for the responces I could not see any place that told me the line # as i have seen it before and at first I just raised it from -.250 to 1.00 + hopeing that would trigger something but it did...
Is any one awake on this Christmas Eve that might have an idea on how i can save this cutting , I,m 82 % done with this cut and I paused it like I have many times before by hitting the space bar but...
How do I get the link for updating part works from version 1.102 to the latest version? Thanks for any help Don Hunter:)
Sign me up and I will try to make it for the Friday cookout. Thanks Don
Do you still have openings for your camp? thanks Don Hunter
With your knowledge and expertise I doubt there will be a need for any danicing girls ! Thanks for sharing your knowledge. I will watch for the link! Don
Scott Thanks for the reply, I didnt realize you were that close. Some day i will have to ring you up and see if your up for a visit. Or if your in the Baraboo area give me a ring and stop in. Don
I just finished this in time for Memorial Day! Pretty happy with the out come but as always would do somethings different if I was to do it again. Thanks to ( Jimmy for the inspiration and the help...
I,m in central Wisconsin and would interested. Don
Thanks Guys I downloaded the file and will see if I can get it to work . THanks Don:)
Would any one be using the rumble pad 2 controlller for running there prs standard and be willing to share there set up for the control keys I would appreciate it . Thanks in advance Don Hunter
David What would it cost for 4 of the clamps shipped to wiscosin? Thanks Don Hunter
Brad which indexing motor did you buy off ebay and did you have any trouble setting it up with your shopbot. Thanks Don Hunter
Thanks I.ll give them a call. Don
Thanks jack for that info I did get the numbers changed and it came up as you showed. I,m trying to find the connectors that will fit the (A) slot so its not a cobbled connection, Thanks again Don
Sorry I forgot that I,m running a prs standard 48x 96 x6 Using aspire software . Thanks Don
Hi every one I finally started my indexer on new years week end and have made some progress ( Have wood lathe stripped and fitted with one of the small stepper motors) that have been discussed here...
Thank You Very Much for the reply, and for the link that you provided, You do very nice work, Don
Jimmy first of all let me say that I was moved by the work you did on this plaque. I know that over time that it grew because of the efforts of your self and other members of this forum ! I know...
Ken thanks for the file , one other thing How do I get them to the program I tried cut and paste , that did not work! Thanks for the help. Don