Dear Bud
Let me start by saying I'm quite envious of your DeskTop MAX. I thought that if I was ever lucky enough to get one (in my garage). I would go for the aluminium bed then build my own...
Type: Posts; User: Martin Reid
Dear Bud
Let me start by saying I'm quite envious of your DeskTop MAX. I thought that if I was ever lucky enough to get one (in my garage). I would go for the aluminium bed then build my own...
Dear kworks
After you have successfully sorted the issue with input switches. My advice would be to change the collet and collet nut. You can't see if they are damaged but keeping them could...
Dear G
a) and b)
All I can say is; I remember in the dark and distant past we had an issue with 'COMS' and moved from the front USB port to one at the rear. We had to use the VI command to work...
Dear G
Have you had a look at the VI command to reset the port number?
Sincerely
Martin
Dear Andy
Let me start by saying a simple work around for the [SPACE BAR] 'stopping' would be to use a wireless keyboard and take this with you when you leave the room.
On a wider note...
...
Dear Richard
I just managed to log in
https://portal.vectric.com
Sincerely and in good faith
Martin Reid
Dear Steve
Farnell have some fans and have US stockist - Newark I think.. If you can find one to fit!
...
Dear Steve
You can find the manual online..
https://www.yaskawa.com/delegate/getAttachment?documentId=TM.V7.01&cmd=documents&openNewTab=true&documentName=TM.V7.01.pdf
Table 6.2 shows the...
Dear Phil
The example here is off my tablet Windows 8.1; I know it is similar in 7 and there will be the option in 10.
32603
All the users in our workshop know to use this to remove the USB...
Dear Phil
Early that day (or any time since you turned the desktop on) did you remove the device from the USB port without using the the 'safely remove hardware and eject media' option.
We have...
Dear Kristi
Your protégée could get started while you are looking for a machinist.
She has the option to design the 'dog house' in SketchUp Free.
SketchUp Fee for the Web here...
Dear Chad
My first reaction would be to shut everything down, PC and ShopBot - power off on all switches. Wait a while, at least long enough for the lights to go out on the monitors.
(be...
Dear John
Do you use a USB memory stick to transfer part files to your control computer?
We traced our 'COMMS errors and lock-ups' to not removing the memory stick correctly with the safely...
Dear Dave
Things have moved on from conventional vs climb; so I feel I could contribute another two penn'oth.
From the days of being an apprentice carpenter using a hand router was always 'slow...
Dear Dave
32433
Those that have used hand routers with a fence will know that machining with the cutter (conventionally) the router and the fence pull together. When on the other hand you...
Dear Gary
I'm also an AutoSketch user (since the 90's). I can always get my copy to work on any 32-bit windows machine; XP, 7, 8.1 and 10. But it will not 'install' on any 64-bit operating system...
Dear Phil
We change our 'pull up' for certain operations there are two commands we use to change the values. VC (Cutter Values - safe pull up) and TS Shopbot Setup - be careful the dialog 'hides'...
Dear Bob.
http://www.talkshopbot.com/forum/showthread.php?24717-ShopBot-PRS-Standard-(4-x-8-)-with-Rotary-Indexer-and-Oneida-Dust-Collection-System
Did your mate see this post (for comparison)....
Dear Bob(s)
$16,000 Australian is about £8,800 or about (US)$11½k
I've never actually seen a 'yellow' shopbot before - Gary may have!. Am I right in thinking the 'runners' have been mated to a...
Dear Seth
I hear what your saying, but if you have the machine there why would you not want to use it? Besides from the machine they will all exactly the same - no messing.
Best of luck, post a...
Dear Seth
If I'm making these 'corbels'. I'm splitting them half way down the fluting. Giving what looks like 25 or 30mm thick slices. I'm cutting them in pairs and then gluing and screwing them...
Dear andrius.ack
I imagine that you are quire frustrated that we are all giving advice rather than answers to your question.
If (like me) you loose control of the mouse - locked in the [START]...
Dear Steven
For my two penn'orth I suggest reducing the pass depth to 3mm or so and increase the RPM to say 19K. Checking chipload calculators would say these (3mm and 19K) are out of range and...
Blackhawk
We have a two pack lacquer we use in the spray shop. I mix that really thin and apply that with a brush. Soaks in really well, it dried quick too.
Don
The Tee track looks...
Dear Kyle
It is the only photo I have showing how we can 'zone out' each part of the table with laminated boards. Laminated because they don't bleed air. I don't have photos but we use this...