Errant cut update. I ran a different file today and all toolpaths went as designed. I also did an air cut with the file that "Ate my spoilboard" and of course it ran just as it was supposed to....
Type: Posts; User: Rtibbs
Errant cut update. I ran a different file today and all toolpaths went as designed. I also did an air cut with the file that "Ate my spoilboard" and of course it ran just as it was supposed to....
Well I’m not stroking anyone.....sorry I brought up the question in the first place. Just trying to understand what happened with my cut. As you can see by the settings from the Vectric file as well...
33258
The Aspire Toolpath:
Cut depth .815
7 passes (Oops, thought it was 6)
.1164
.2329
.3493
.4657
.5821
Interesting. If what you say is true (and I have no reason to doubt it) then I guess I’ve been fortunate as all my files have been run from a USB stick without encountering errors. As my Vectric work...
I really wish it was that simple however the bit is in the same position as I started. What shocked me at the beginning of the cut was how close the collet nut was to my material surface when it...
No. Not during the final profile cut.
Only stopped between bit changes for each Toolpath
No, everything was normal up until the profile cut.
The 3D finish cut was a rather long one 4+ hours but the following Vcarve was normal
I now have a rather deep circle cut into my spoilboard :(
The last cut on a project (profile cut) went wrong.
No problem with the previous roughing cut, the 3D finish cut or the Vcarve cut.
When I ran the profile cut the bit plunged completely through the...