Check to see if your mail box is full I tried to send several times
Type: Posts; User: jerry_stanek
Check to see if your mail box is full I tried to send several times
I sent you a PM but I'm not sure you got it. I sent the Z Friday usps and have a tracking number for it. I will PM you again with it
I will need your address to ship to. All I want is the shipping you can have it. I will see what the cheapest way to ship is but it is pretty heavy.
what steppers do you have I found the one that came with it
do you need the stepper motor or just the frame I have one that you could have.
I had an old PR that I put a 4g on it and it worked fine. It had a ball screw z and never stopped it from working.
Same here it even says that in the setup instructions
You might want to look at the Centroid Acorn and see if that would be a fit for you. I changed mine and brought back life to my older PRS standard.
It may be a good router but seems a little pricey when you add the power cord
I am on an Acorn controller and they still use the same green or blue connectors
My guess is it is a bad cable
I physiclally move the drives around. I know that is a problem but if you are careful you can pry the drives off their green connectors without removing the board. I have 8 drivers and 4 have the...
It also could be a bad cable
do you know which one it is? you could change it with one of the oyher ones or just change the Z and Y with both X drives.
Did you hook the other motor up to the noisy drive. It may be a loose wire going to the Gecko. Are you getting all green lights on the Geckos and is the resistor hooked up
I always just switch the green and black
That looks like the first one I had. I did upgrade to the 4G and that made it just fly compared to the original controller that would only use 2000 lines of code and then have to reload the next...
I think they would repair it if you sent it in but like Ken said there is something else wrong
You can use any one but make sure you use the old resister. What is the problem it may just be the little green fuse is blown. Gecko will send you them for free or you can call Gecko and get a...
I have been running an HP Elitedesk 600 on mine. Micro Center had it for $99 when I bought it refurbished I also have a roll up keyboard that is dust proof
Why would I want to do that. If something is working good why try an unknown. I did that with the Shopbot and bought a plug and play unit from Gray and it didn't work. I got blamed that it was my...
The beisse I run has a controller that still uses windows 95 and runs flawlessly
True but it does work
I see that it includes a lot of options that are extra from other companies
Both Packages Include:
Robust Dual Z with 5x4 drill bank
5hp ATC spindle
10 HP Becker blower
4-Zone (for the...
What motors do you have
I bought a PR back in 2007 that I used to get a PRS in 2008 have been running that machine since. It has paid for itself and now just keeps making money. I did try Gary's retrofit upgrade with the...