Search:

Does ANYONE REMEMBER THE SOFTWARE THAT WAS AVAILABLE THAT COULD SEGMENT A MODEL INTO SLICES THAT WOULD FIT YOUR MATERIAL.
tHANKS
DON

hi KEITH,
i'M A PRT GUY but it looks to me by your pictures that you probably have your z touch off wire shorted on some thing. It doesn't take much of a nick move the wire around an make sure it...

Hi Tom,
did you coat the inside and outside., if not you need to coat the inside and out side with the same number of coats. A guy I new was making humidors and that is what he found to be the...

that s right Brady, you dry cut cast iron.
Don

I' have heard of cutting Aluminum and brass and other materials but never cast iron.
It started out that I had a craftsman jointer, that I had used in the beginning of my wood working days. As I...

it looks like you do not have the correct control card upgrade. You may have upgraded to 4g but you also need a control card version upgrade. I had this same problem and that is what I found out from...

Hi Jeff,
I think what you will encounter is that tool life will be greatly diminished because of the high Nicole content in stainless steel. Sheet stainless is usually 316 or 304 stainless which...

I have had wires break or come loose and cause intermittent problems.
make sure nothing has come loose or broken and shorting on something it should not.
Just a thought
Don

you can always node edit your fonts to clean them up if they are problematic
Don

I will be going the Ann Arbor camp September 28th.
Any one willing to pool. I live in western Michigan Around Grand Haven and willing to drive From here to Ann Arbor. Please no detours.

Let me...

I think Dave is trying to say that what ever portion of the table you are not using should be masked off with dummy material that you will not be cutting.
Don

you will need to measure the height that you have to go . divide by about 7" of rise then about 10" of run to decide your stringer length.
I'm assuming that maybe ,you may not need 8' but you can...

Hi Joe ,
I Have Aspire. I think the easiest way would be to draw 2 lines with your run and your rise on your material and the do a copy for the number of repetitions you need. if you need help send...

Hello All,
I hope every one is having a great summer
My Question is how many accessories can use the 12v from the power supply or what is the max amp draw allowed from each 12 volt line?:confused:...

can you supply some dimensions?
Don

I'm a tool freek, especislly computorised tools . I'm a machinest an have come to age when the cnc were starting and have been envolved in cnc my whole career.
I have also been envolven in wood...

so what does the tool path look like.
Don

Hi Tim,
You could use the "Header Writer" in the Shopbot software. It is listed under "Tools" drop down menu. There is also alot of other information that you could put in there that would be...

I'm using 3.6.34 I upgrade every 5 or 6 versions. It seems to work for me.
Don

Try MSCindustrialsupply.com

Eric,
What you are looking for is called a woodruff keyseat cutter.
You can find them at Msc.com. Use search word keyseat cutter.
Don

I agree with Bill but I have styrofoam on the walls (I have a pored concrete foundation) and I put fiber glass in the ceiling but no sheet rock and the noise is not bad upstairs in my house. As for...

I'm in Fruitport ,Mi. I have a 48x48 and an indexer and a vac table and auto tool changer. E mail if you are interrested.
Don

Pascal
i just did some phenolic and I found it to be very abraisive and will wear down carbide very quickly. Needless to say I did not make any money. the edges were very clean but I relized it...

Sorry Paul, no number.

Any of the email addresses should get you what you want
Don