Thanks for the feedback,
Just to clarify...The CNC is enclosed in a room but the operator sits outside and is able to view the machine through safety glass windows in the shutter doors. So let's...
Type: Posts; User: andym
Thanks for the feedback,
Just to clarify...The CNC is enclosed in a room but the operator sits outside and is able to view the machine through safety glass windows in the shutter doors. So let's...
My workplace had a visit from a Health and Safety inspector a while back, and despite our ShopBot being housed an enclosed in a room, we were asked to install a safety mechanism to stop the CNC from...
We have a PRS Alpha ShotBot purchased 2008-9. We recently had a visit from a health and safety inspector and despite the CNC being in an enclosed room they wanted us to install a stop switch...
I have a PRS Alpha that I purchased in late 2008.
It has been running fine but today I got a 50hz buzz from the zero plate when I held it and put my other hand on the X Axis rail which is grounded....
Thanks Brady, good to know.
I have a PRS Alpha, I was having some cutting accuracy problems so have recently changed the pinion gears. It is cutting fine but I just have a question.
I have read that there should not be any...
HI all,
Just a quick update. managed to cut the block using a 1/2" downward spiral traveling at 5ips and 7500 rps.
Thanks for all the help.
I think downspiral bit will be the way to go, not sure if I will be able to find a compression bit that is 4" long but I will do some research.
I will create a roughing path to cut a little...
Hi, I am hoping that someone might be able to offer some advice with a difficult job I have on.
At our workshop we have a PRSAlpha with the 4HP spindle and extra height in the Z axis. We have...