Search:

Frank
l do have Gary’s training video. Let me know if you would like a copy? If I have Gary’s permission.
A Bentley
bentleyswoodshop@verizon.net

The problem is on the design computer. The control computer is just for the shopbot. It has windows 7
Thank You

Hello
Has anyone had any problems with the shopbot link 1.21.3. I installed it and when I open it Norton anti virus removed it I am running windows 10
Thank You

Any recommendations on where to buy a computer to run the shopbot.it just needs to run the machine nothing else. Thanks

Is it possible to buy and set a regen blower for under 2k?

I need to upgrade my black box to a regen blower. I have a 6 zone 4 X 8 top. I hold what I need to now with the 4 lighthouse motors now. I get -7 hg now with all 4 motors. I do not have 3 phase....

Does anyone know the best way to use system restore to go back to 3.6.44. I updated to 3.8 and did not like the way it worked. I did a system restore point before the update. When I do the restore...

Check out this and there two more about 10 miles up the Allegheny River. They are a awesome bird!
http://pittsburgh.cbslocal.com/2013/02/27/2-bald-eagles-build-nest-in-citys-hays-neighborhood/

Jim
I had the same problem when I first set up the shopbot. Mine was a bad limit switch and electric interference. Try turning off your limit switches and see if that helps.

Gary
I have never been really happy with the parts I cut with the link, and could not get my dados to match e cabs. The last kitchen took to much playing around to make the fit. When I set the...

Gary
I am using a dial indicator chucked into the spindle at 4" from center. It is the Y direction. The best I can do is a.0005 difference which I can live with. Thanks for the link thats my next...

I have a prs alpha and I am tuning up the spindle, (z axis). I got the y gantry plumb, but the spindle is off by .020. There is not enough play in the spindle mounting plate to move the spindle into...

Yes Jeff, it does fill the gap to the side rails. In Russ's pictures he has them on the sides. I did mine on all four. I think the maple adds some strength to the maple plywood.

Jeff
That is how I did mine, but T & G a piece of Maple around the border of the Maple ply. It works well keeps most of the chips on the table and is a place to bolt a fence to

Kerry,
It is still a mystery.

I am with you Don. However on the ecab forum it does sound like an update is in the near furture. There are issues with the link and nothing is being fixed. When dealing with two companys it is easy...

I have sent the shopbot link cab file, the twd file and the esj file to both Thermwood and Shopbot tech support. I have viewed the code and the only cut the 3/16 ( # 14) bit makes is for assemble...

I am building a wall unit. designed in ecabs, cut with sb link. The ecab nest shows a .247 full dado for the backs. The sheet print from the link shows a dado for the back. The dado is not being cut....

Does anyone use a 3/8 downsprial bit to cut dado and tenons? I cut my dados 3/8 deep. Right now a use a 1/4 downsprial. I would like to do the cut in one pass. How would you set this up, 55% dado...

What type of felt are you using? Or what is the part# for Mc master Carr
Thanks

Thanks for the info

does anyone know if a wireless security camera and monitor, interferes or creates static that would cause a problem with the sb controller box ? The camera will be on the other side of the wall where...

Well Gary I tried to get the info you wanted however ecabinets will not open the job. I set up the link using your settings. Dado depth .375, depth clearance .02, fit clearance .01. I cut the first...

I am running sb3.6.24 and the ome sb files. Shopbot tech went over mtc files on the first problem as well Thermwood techs to check my settings. I used a machinist .375 block in the dado and it fit at...

I am so lucky. I finely bought the shopbot link I got Gary’s DVD and set all my setting. Checked the cut off falls and the software or link placed the off fall 36” in the minus y position. A week...