Search:

Does anybody have any advice on websites where I can list my PRS for sale. I did list it in the forum, but I would also like to get a little more traffic without using Ebay. Thank you.

What rpm,feed rate, and plunge rate do you put it at for a 60 degree vcarve bit when you engraving with it into Purple Heart!!

Thanx Bryan and Steve for your help!! I'm ready to rock some Purple Heart!!

Soooo what would be an appropriate speed for a 1/4" end mill?

I'm trying to profile a piece of Purple Heart wood with an 1/4" end mill!! and I want to know where to put the router speed at, the feed rate.... Stuff like that!! Anyone have an idea?

Awesome!! Thank you all!! I created the letter to fit to curves and then was able to use a profile tool path and added tabs!! You all rock!! Thanx again :)

Yes I'm using PartWorks!! I tried to use a profile tool path because it has the tab option but it wouldn't cut out the center holes of the letter B! How do I do it?

I'm trying to cut out a large letter B out of MDF board! The size would be like 7.5"x12" . How would I cut it out? A pocketing tool path cuts it out nicely but I couldn't figure out how to add tabs...

Very nice. How did you finish them?

Thought about that but. It worked fine after I rebooted though. Could be intermittently sticking???

Plugged my PRS 48x96 in today, connected my laptop, turned the power switch on and to my surprose the router started turning.

Anybody ever had this happen before?

I am using a PRS standard with PC router and 60 degree Onsrud bit to make small signs in .75 thick Oak. With some fonts, I end up with sharp leftovers, for example, the material that is left after...

Good information guys. I have worked in a manufacturing environment for years but only with my Bot for about 1. So starting out I want to make sure I am prepared for the future. Thanks again.

Steve got it. I was using the vcarve toolpath. Thanks!!!!!!!

thanks guys. I tried to do the six sided glue up design but I am having a problem selecting certain vectors for the 90 degree tool. I had to use node editing to cut the vecotrs but then I cannot...

Thank's jack. Good link. Definately like his work and themes.

Still new at this....but between my son and I, we are starting to accumulate a bunch of files and we can't remember what they are without opening each one up.

Does anybody care to share how they...

Anybody ever make small wood boxes with their machine? I have made a few out of 1/4" oak for some gifts. Everybody seams to like them, just wondering if ther are some ideas to make it easier. So...

Dont forget now. I would really like to hear what you have to say.

thanks for the heads up. those are nice.

Yep, that did it.

What if you have a larger sign and need the clearance tool to be a 1/4 endmill to get the detail you need around the lettering. How do you use a larger diameter endmill to clear...

watched the videos and they were good. what am I doing wrong when I choose the vcarve toolpath and the clearance tool option is grayed out? (I have selected the outer ring and the text).

Easy one for you experts. Say I have a round piece of mdf and i want to cut some text out on it so the text is raised. What is the trick to getting into the tight corners of the text without using...

thanks guys for the good input. still processing and deciding what to do.

The water based finsih sounds real good. I just looked at the Minwax web sight. Can anybody recommend a specific product that they use? Most of what I make is small (9x2) to large (30 x 6) vcarved...