Search:

This is my original control box for my PRT that I got back in 2005, the board was traded in when I upgraded the control box, but the two power supplies are still in it. Getting ready to move and...

Brady you talking about the smudge, carve, smooth, etc tools? if so yes alot of time the standard file I have needs a bit of tweaking for the clients request and nothing like the power to remove or...

Well gang I made the switch over from AutoCad ArtCam 2018 to CarveCo and couldn't be more happy!
Installed smooth, all 3600+ releif files pulled over, no issues
Opens quicker then the last ver of...

How clean is the PC, exposed to the dust or sealed in dust free zone? if dirty have you cleaned out the Pc lately?
How hot is the shop? is the pc overheating?

Have found my problem after a much closer inspection of the x geko drive the gear and the drive bar have worn and not seating correctly..... just like it I'm worn out.

Approx a year or so after getting the 4G upgrade, I did replace both of my window XP boxes with newer window 7 boxes, yes I have two shopbots one a buddy prs/prt no one at Shopbot really can put a...

When I first upgraded I didn't notice it but that was 3 or 4 years ago and now I'm doing some wood sheaths for a local knife maker and I can really tell it on them vs the 3d Carving,
actually, the...

yes Gecko Drives, sorry it was really late last night when I called it a night.

I've been noticing on my X axis that going one direction it's very smooth while the opposite direction there is a growing shuttering in the moves.

I've checked all cables to both of the x drives,...

I didn't get an indexer until I had a project that spanned 5 years of orders since 2013.


Now I'm not saying I can't do these any other way as I quite happy work on my lathe and letting the chips...

Wow, me like a whole lot!

I know the following link is for a laser box maker but I've used it with some modifications to create boxes on my Shopbots after pulling in the pdf into ArtCam Pro
...

Take a look at this post, http://www.talkshopbot.com/forum/showthread.php?17243-Pedastal-table-base&highlight=tables
Does not take indexer, just another way to do what you are looking for.

Mike just looking at the image you attached, and being its your first sign, I'd look at doing a V carve with all of the dark blue.
I did a quick 5 min reduce colors and vector trace to create a file...

Thanks

If I remember correctly this bench plans were in a older woodworking magazine, which one not sure with out looking though several hundred I have in the office.

I just looked at the...

Does this count?
All parts the were curved or mortised were cut on the Shopbot.
But I used red oak for the whole project a few years ago.

...

I'd be interested email me a phone number at bcrismas@yahoo.com

Did two coats of lacquer on the plaque.
After it dried overnight took a small art brush and painted all the letters with a water based latex.
Wiped off any overage with a soft cotten towel. Let dry...

Thanks Jack actually no stain just gloss lacquer on black walnut, don't like to use stains unless the client twist my arm.

Having a couple Fire Chiefs in the family and several other friends that work in Fire Department or Police Department I've done a lot of the standard Maltese Cross Relief that obtained from Vector...

Feel the same way, I'd rather do a few custom jobs, that pay you for your time and effort. I'll start a new post but have one I'm working on for LODD for a local Fire Department.

Thank Jeff
Sometimes I get lucky...

http://www.talkshopbot.com/forum/attachment.php?attachmentid=26740&stc=1http://www.talkshopbot.com/forum/attachment.php?attachmentid=26741&stc=1http://www.talkshopbot.com/forum/attachment.php?attachme...

In ways, I love craft fairs, and in ways I don't love craft fairs.
You never know what they will be buying, and I only do 3 or 4 a year as the day job keeps my hopping all over the US installing and...

Thank you. Jack
Father got the idea from a small Cross I made for my Girlfriend,
He liked it so much that he wanted the weave to be in the center on one side and the lamb on the other side,
But...